Kuroinu

<h2>Ranger 12 volt UTV Heater with Swivel Base HeaterFeatures:</h2><ul><li><span>Uses One 20 Amp Blade Fuse</span></li><li><span>Adjustable swivel base and plugs directly into lighter/power socket</span></li><li><span>180 Watts Power Rating and 15 Amp Current Draw</span></li><li><span>Includes installation hardware</span></li><li><span>6 foot, 10-gauge power cord</span></li></ul>

<p>Freeze, no longer. No Need to mess around with expensive and complicated radiator heaters for your UTV, simply wire this 12v UTV heater up and stay warm this winter. This heater can be installed in any UTV and requires only minimal wiring.</p><h2>12V UTV Cab Heater Features:</h2><ul><li>The heater features a 3 position switch from heat to fan only.</li><li>Rotate the top knob to adjust the fan speed to your preference.</li><li>Easy to install and complete with installation instructions.</li><li>Positive cable is fused.</li><li>300 Watt Power Rating</li><li>1000 BTU/hr</li><li>Includes 15' 12 gauge power cord</li><li>Interchangeable between heat and fan mode</li><li>Swivel base</li><li>Includes mounting hardware</li></ul>

<p>When the weather starts to change and the snow begins to fall, you don&rsquo;t want to be caught off-road in your Polaris Ranger 1000 without a good aftermarket UTV cab heater. This Inferno Cab Heater w| Defrost by Inferno Cab Heaters is one of our favorites. This side by side cab heater kit for the Polaris Ranger comes with everything you need to install a compact yet powerful cab heater underneath your Polaris Ranger&rsquo;s dash to get an impressive 18,000 BTUs of heat. You can custom order this cab heater for either the Polaris Ranger 1000 or Polaris Ranger XP 1000.</p><h2>Inferno Cab Heater w| Defrost Features:</h2><ul><li>18,000 BTU heater</li><li>Direct-fit to your machine and hidden from sight</li><li>Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, duct work &amp; wiring</li><li>Includes OEM rectangular defrost vents</li><li>Includes shut-off valve</li><li>Pre-thermostat plumbing give this kit quicker and more consistent heat</li><li>Custom multi-speed switch fits right into factory dash holes</li><li>SPAL multi-speed blower. SPAL is the world leader in high performance fans and blowers, ensuring performance with longevity that is second to none.</li></ul><p></p>

<p>The Inferno thermostat bypass valve (for 1&Prime; radiator hose) provides a more consistent heat. More coolant will be directed through the heater before it is passed to the radiator.</p><h2>Specification:</h2><p><strong>Weight: </strong>4 lbs</p><p><strong>Dimensions: </strong>9 &times; 7 &times; 3 in</p><p></p><p><span><strong>Featured Blog Post:</strong>&nbsp;<a href="%%GLOBAL_ShopPathSSL%%/epr-blog/radiator-issues-how-to-find-and-fix-your-polaris-ranger-radiator-woes/" title="Got radiator issues? Read this blog post to learn how you might be able to fix them!"><span id="docs-internal-guid-67b236cf-7fff-7fd5-ec96-16d3f9903bd3"><span>Got radiator issues? Read this blog post to learn how you might be able to fix them!</span></span></a></span></p><p></p>

<p>Stay warm this winter with this 12-Volt mountable ceramic heater/fan.</p><p>Heater features a 3 position switch from heating to fan only. Rotate top knob to adjust the fan speed to your preference.</p><p>Easy to install and complete with installation instructions.</p><p>Positive cable is fused.</p><p>The 12-Volt Direct Wire Ceramic Heater is the largest, most powerful 12-Volt DC heater available.</p><p>300 watts of power ensures plenty of heat where you need it. Directly connects to your vehicle battery.</p><p>Direct Hook-Up to Your Vehicle Battery</p><ul><li>Switch from Heat to Cool Settings with the Flip of a Switch</li><li>Uses 2 Blade Fuses, 15 Amp Rating</li><li>25 Amp Power Rating, 300 Watts</li><li>Adjustable fan speed, low and high</li></ul>

<p>Firestorm Compact Cab Heaters by Moto Alliance provide the flexibility of using your UTV/SxS comfortably in sub zero temperatures. Our complete kits are customized to include vehicle specific mounting brackets, all hoses, stainless steel clamps, aluminum hose fittings and electrical connectors - No extra trips to the hardware store required.</p><h2>Compact Cab Heater w| Defrost Features:</h2><ul><li>Adjustable temperature settings and 360 degree louvers</li><li>3 adjustable fan speeds and heavy duty squirrel cage fan</li><li>Built in shutoff valve</li><li>Unicoil for professional installation</li><li>High-grade radiator hose rated -40 degrees to 120 degrees Celsius</li><li>High performance alloy Y connectors</li><li>Injection molded housing, eliminates sharp corners</li><li>Highly efficient heat exchanger capable of 14,600 BTU at 135 CFM</li><li>Defrost components are included with every kit</li><li>Includes all necessary hardware and installation instructions</li><li>All necessary hoses, stainless steel clamps, aluminum hose fittings and electrical connectors</li><li>Includes 3 year manufacturer's warranty</li><li>Dimensions are 5" high by 12" wide by 13" deep</li></ul><p><b>NOTES:<ul><li>Ranger 570 models won't achieve maximum heat unless you are operating at 3000-4000 RPMs.</li><li>Will NOT fit Ranger 570 models with power steering.</li><li>Defrost vents will interfere with the Polaris After Market Full Steel Cab Enclosure on the MID SIZE Ranger models.</li></ul></b></p>

<h2>Thermostat Bypass Valve Features:</h2><ul><li>Routes a constant flow of hot coolant through the heater core</li><li>Provides consistent heat to the cab interior</li><li>Operates most like an automotive heating system</li><li>Includes hardware and instructions</li></ul>

<p>*** NEW in 2023! Y Fittings have been upgraded from the two piece aluminum and brass barb fittings, to single piece, Brass Y Fittings. The Single piece design makes installation faster and easier, all while eliminating any chance of leaky threads.</p><p>2021+ Models with Polaris OEM Tip Out Windshield may need to relocate the defrost vents to the rectangular spaces on either side of the center console. A small amount of trimming to the Dash Panel cross support is necessary to allow the duct hoses to pass by.</p><p>Use your cooling system to heat your UTV's cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. What make our heaters better, if not the best, is that you are dealing with the designer/manufacturer and most of the kits have been installed by us and fitment checked. We use modern automotive quality vents- not something that looks like is was made in the 50's so they match the modern styling of your UTV. Most of our kits use custom made solid CNC machined Y connection fittings, so there is no chance of leaking welds. We endeavor to use quality parts and hardware in all our kits.</p><p>This Ice Crusher Under Dash Heater kit has 6 vents and fits completely up under the dash area. This kit comes with a compact yet powerful heater with a three speed fan which will deliver heat from the 14,600 BTU* Compact Heater Unit. Modern automotive quality adjustable vents direct the heat were you need it. Two 2" vents mount in the center of the dash top to defrost the windshield, two 2&rdquo; vents mount in the center dash panel and two 2&rdquo; vents mount in the lower dash area. Kit is also available with optional in dash Heat Control (shown in dash switch picture). A unique feature of our kit is that the heater intake comes from inside the cab where the air is cleaner and warmer. Warmer air means more available heat for you inside the cab. Kits are supplied with our custom CNC made alloy Y connectors that connect directly to the engines cooling system for fast heat (MaxStat not required with this kit). Kits also include custom CNC laser cut mounting brackets, heater hoses and duct hoses, hose clamps, new and improved vents, hole saws (for the heater hoses and vents), grommets, switch, wiring loom and terminals included, templates, your specific mounting bracket with hardware, and instructions.</p><p>*Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more that capable of heating 99.99% of all UTV's</p><p>#British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.</p>

<h2>Seat Heater Kit Feature:</h2><ul><li>Stretchable neoprene base material is water-resistant and extremely pliable</li><li>Waterproof connectors for an all-weather installation</li><li>Includes wiring, switch, relay, and complete instructions</li><li>Hi/​Low switch for adjustable temperature settings</li><li>UTV heated seat kit includes both seat base and back heaters</li></ul><h2>Specification:</h2><ul><li><strong>Product Name:</strong> Seat Heater</li><li><strong>Base Color:</strong> Black</li><li><strong>Length Imperial:</strong> 17.00" (Base Pad)17.50" (Back Pad)</li><li><strong>Material:</strong> Neoprene</li><li><strong>Units:</strong> Kit</li><li><strong>Width Imperial:</strong> 10.00" (Back Pad)13.50" (Base Pad)</li></ul>

<p>When the seasons change and the first snow begins to fall, if you haven&rsquo;t already outfitted your Polaris Ranger 570 Mid Size with a good UTV cab heater, it&rsquo;s already too late. That&rsquo;s why you should order this Inferno Cab Heater w| Defrost by Inferno Cab Heaters now so you don&rsquo;t have to shiver later. This side by side cab heater features a rating of 18,000 BTUs as well as custom multi-speed switch that fits right into your Polaris Ranger&rsquo;s factory dash holes. When you order this cab heater for the Polaris Ranger, you will get all the parts and components you need for an easy installation.</p><h2>Inferno Cab Heater w| Defrost Features:</h2><ul><li>18,000 BTU heater</li><li>Direct-fit to your machine and hidden from sight</li><li>Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, duct work &amp; wiring</li><li>Pre-thermostat plumbing give this kit quicker and more consistent heat</li><li>Custom multi-speed switch fits right into factory dash holes</li><li>SPAL multi-speed blower. SPAL is the world leader in high performance fans and blowers, ensuring performance with longevity that is second to none. Fan has 1 year warranty</li></ul>

<p>The Quad Logic Seat Heater Kit is the ideal accessory to add to your machine when riding or plowing in cold weather conditions. The easy to install seat heater pads fits under your seat back, base and connects to your existing battery.</p><p>The contour shaped pad maximizes the heated surface and includes High and Low heat settings allowing you to find your correct comfort level.</p><p>Made out of neoprene fabric, allowing water and moister to shed vs. soaking it up. All heating elements are evenly stitched to the pad vs. glued, ensuring proper heat distribution and providing a longer life.</p><p>Max temp of 125 degrees Fahrenheit / 51 degrees Celsius.</p><p>Heat Pad dimensions: Seat Back &ndash; 18&Prime; x 10&Prime; Seat Base &ndash; 17&Prime; x 14&Prime;</p>

<p>Stay warmer outside longer with a top-quality Polaris Ranger 1000 Cab Heater with Defrost for 2020-current models from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight, and includes everything you need to install it into your Polaris Ranger 1000 (2020-current) including both the standard and crew cab models.</p><p>The NEW pre-thermostat plumbing gives you quicker and more consistent heat! Don&rsquo;t pay $100 for a thermostat bypass valve like you do with our competitor's kits.</p><p>It's built with SPAL high-performance fans, ensuring longevity and high performance and the fan comes with a 1-year warranty.</p><h2>Polaris Ranger 1000 Inferno Cab Heater Features:</h2><ul><li>Direct-fit to your machine and hidden from sight.</li><li>Fits BOTH the Standard and Crew Cabs.</li><li>Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, ductwork &amp; wiring.</li><li>The OEM rectangular defrost vents are included in this kit! They fit exactly in the pre-molded factory embossments.</li><li>NEW Pre-thermostat plumbing gives this kit quicker and more consistent heat! Don&rsquo;t have to pay $100 for a thermostat bypass valve like you do with our competitor&rsquo;s kits.</li><li>SPAL multi-speed blower. SPAL is the world leader in high-performance fans and blowers, ensuring performance with longevity that is second to none. The fan has a 1-year warranty.</li><li>The custom multi-speed switch fits right into factory dash holes.</li><li>18,000 BTU heater.</li></ul><p><strong>About Inferno Heaters:</strong><br />Inferno&trade; Cabs Heaters is an OEM and Aftermarket Manufacturer of Cab Heaters for use in a wide range of applications. We take pride in producing top-quality products that we manufacture right here in the USA. All of our cab heaters come equipped with a SPAL blower and an aluminum heater core, meaning Inferno&trade; Cab Heaters are built with components that stand above our competition. This is the highest quality and most heavy-duty heater on the market, you will not be disappointed.</p><p>We made our mark as a producer of OEM-quality aftermarket cab heating kits for the UTV market. Nobody offers a full line of hidden direct-fit UTV heaters like the Inferno&trade; line of cab heaters. We bring in each machine and customize a heater that fits ONLY that machine. We design our heaters to be friendly to install and out of sight, making sure you have the cleanest and best-looking heater setup available. Our cab heater kits include all components needed for the complete installation of your machine. Take your UTV to the next level today and purchase an Inferno&trade; Cab Heater!</p><p></p>

<p>From the Designer of the Firestorm Heaters Kits comes our new and improved Ice Crusher UTV Heater Kits. We have more UTV Heater Kits and Application than anyone else! Our kits are used as OEM by some UTV manufacturers.</p><p>Ice Crusher UTV Heater Kits come with a compact yet powerful heater unit. All components are custom-made with custom laser cut, powder-coated mounting brackets to fit your model of UTV not just some generic bracket. Kits are supplied with custom CNC alloy Y hose connectors (kits requiring 5/8&Prime; or 3/4&Prime; Y&rsquo;s are made from nylon) or other fittings as required. Kits also include coolant hoses, EZ-Coils (used to stop the hoses from kinking), hose clamps, hole saws (for the heater hoses and Vent), grommets, shut off valve (if required), a wiring loom and terminals included, templates, dash vents and duct hose, your specific mounting bracket with hardware, and instructions. Note: Kit contents differ depending on your application.</p><p><b>Please Note:</b> Competent mechanical skills are required.</p><p>Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front louvers to direct the heat where you need it. The heater features a three-speed fan and temperature adjustment is located right on the 14,600 BTU* heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet. Kits are supplied with our custom CNC made alloy Y connectors which connect directly to the engine's cooling system. Comes with templates, mounting brackets, hoses, custom CNC made Y fittings, built-in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more.</p><p>Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more than capable of heating 99.99% of all UTV&rsquo;s</p><p>British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one-degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.</p><h2>****THERMOSTAT IS OPTIONAL</h2><h2><a href="%%GLOBAL_ShopPathSSL%%/polaris-ranger-ice-crusher-maxstat-inline-coolant-bypass-thermostat-for-utv-heaters-by-ice-crusher-heaters-ic-maxs.html" title="Inline Coolant Bypass Thermostat for UTV Heaters" target="_blank">Ice Crusher MaxStat &ndash; Inline Coolant Bypass Thermostat for UTV Heaters</a></h2><p>The MaxStat directs all engine coolant to your Ice Crusher Cab Heater, this means that the output of your heater will be at its maximum. If there is heat in your cooling system then you will have heat from your Ice Crusher Cab Heater. More heat means a warmer cab and in turn a warmer you!</p><p>MaxStat only opens to let coolant flow though the radiator when the cooling system requires it to keep the UTV engine at an optimal temperature.</p><h2><a href="https://everythingpolarisranger.com/polaris-ranger-hose-clamp-off-tools-by-ice-crusher-heaters-icch-hc1-epr.html" title="Ice Crusher install Clamp off Tool" target="_blank">Ice Crusher install Clamp off Tool (Make Heater Install Easier and Faster)</a></h2>

<p>The Quad Logic Seat Heater Kit is the ideal accessory to add to your machine when riding or plowing in cold weather conditions. The easy to install seat heater pads fits under your seat back, base and connects to your existing battery. The contour shaped pad maximizes the heated surface and includes High and Low heat settings allowing you to find your correct comfort level. Made out of neoprene fabric, allowing water and moister to shed vs. soaking it up. All heating elements are evenly stitched to the pad vs. glued, ensuring proper heat distribution and providing a longer life.</p><h2>Seat Heater Kit Features</h2><ul><li>Max temp of 125 degrees Fahrenheit / 51 degrees Celsius.</li><li><strong>Heat Pad dimensions:</strong> Seat Back – 18″ x 15″ Seat Base – 18″ x 15″</li></ul>

<p>The MaxStat directs all engine coolant to your Ice Crusher Cab Heater, this means that the output of your heater will be at its maximum. If there is heat in your cooling system then you will have heat from your Ice Crusher Cab Heater. More heat means a warmer cab and in turn a warmer you!</p> <p>MaxStat only opens to let coolant flow though the radiator when the cooling system requires it to keep the UTV engine at an optimal temperature.</p> <p>CNC Machined Aluminum.</p><h2>Sizes available:</h2><ul> <li>3/4'' (19mm) for 3/4'' ID Radiator Hoses</li><li>7/8" (23mm) for 7/8 ID Radiator Hoses</li><li>1'' (26mm) for 1" ID Radiator Hoses</li><li>1 1/4" for 1 1/4' ID Radiator Hoses</li></ul><p></p>

<p>Your Full Size Polaris Ranger XP 1000 isn&rsquo;t just for warm weather; sometimes you might want to go for a cool evening ride and watch the sunset. This Inferno Cab Heater with Defrost will keep you warm on those cool days and extra toasty through the cold winter. Everything Polaris Ranger wants you to take advantage of every opportunity possible to enjoy your machine, that's why we offer a wide variety of aftermarket accessories. Take your UTV to the next level today by getting yourself a cab heater!</p><p>This cab heater fits right under your hood and the included switch fits directly in to the factory dash hole. You'll love the 2 speed high and low output this heater provides to meet your comfort level. Can&rsquo;t agree on full heat or just a little? This heater also has four fully adjustable louvers. Whether it is sunset rides or the bitter winter cold, this cab heater is a good investment for you Ranger.</p><h2>Inferno Cab Heater w| Defrost Features:</h2><ul><li>18,000 BTU heater</li><li>Direct-fit to your machine and hidden from sight</li><li>Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, duct work &amp; wiring</li><li>Includes OEM rectangular defrost vents</li><li>Includes shut-off valve</li><li>Pre-thermostat plumbing give this kit quicker and more consistent heat</li><li>Custom multi-speed switch fits right into factory dash holes SPAL multi-speed blower. SPAL is the world leader in high performance fans and blowers, ensuring performance with longevity that is second to none.</li></ul><p>Optional Crew Cab Rear Heat Extender: If you are purchasing this Inferno Cab Heater for a Crew model, then you might want to add this great option to your order! The rear heat extender kit includes 2" flexible duct hose with louvers and T-fittings to help heat reach your passengers in the rear of your Crew.</p>

<p>Imagine taking your UTV in for cold weather trail rides among sub-zero temperatures for playing and tackling jobs among snow-covered trailed and roads. The under hood heater is capable of giving you just that, with 3 adjustable fan speeds and a powerful heat exchanger that can quickly push the temperature in your cab from below freezing to well over 100 degrees of blissful comfort regardless of the outside temps. Installation is made simple with all the mounting components and parts needed, specific to the model of your Polaris Ranger.</p><p>Every kit includes key components such as the patented Unicoil, high grade radiator hose (rates from -40 to 120 Celsius), high performance alloy Y connectors and even defrost components to help keep your windshield clear-because safety is important when your outdoor excursions take you out into snowy conditions where trails are difficult to read. When winter rears its ugly head you no longer need to store your UTV or wait for fair weather days. The Firestorm compact cab heater keeps you in control of your schedule because Polaris Ranger owners don’t take “snow days”.</p><p>Your adventure soul should not be trapped just because it is winter. Right? To continue your trails even in winter, this compact heater has all the right features. This powerful heater has the ability to increase the freezing temperature and turn the inside of your vehicle cozy and comfy on the ride, regardless of the temperature outside. You can adjust the temperature as well as the fan speed according to your requirements. The installation is quite easy with the necessary hardware included. It is compatible with the 2013+ Ranger XP 900 models. It is efficient and high-performance heater to ensure you a warm and comfy ride.</p><h2>Cab Heater Features:</h2><ul><li>Adjustable Temperature Settings and 360° Louvers</li><li>Three (3) adjustable fan speeds and heavy duty squirrel cage fan</li><li>Built-in shutoff valve</li><li>Patented Unicoil for professional installation</li><li>High-grade radiator hose - rated -40° to 120° C</li><li>High-performance alloy Y connectors</li><li>Injection molded housing eliminates sharp corners and protects knees</li><li>Highly efficient heat exchanger capable of 14,600 BTU at 135 CFM</li><li>Defrost Components are included with every kit</li><li>Includes all necessary hardware and installation instructions</li><li>Dimensions: 5"(H) x 12"(W) x 13"(D)</li><li>Three different fan speeds.</li><li>Includes the defrosting parts as well.</li></ul>

<h2> Ride All Winter Long </h2> <p> When the air gets icy, you have two options if you want to ride: Put on 5 winter jackets so your arms don’t bend and then fill the rest of the space in your cab with those old blankets you’ve had since high school, or get SuperATV’s Cab Heater for the Polaris Ranger XP 1000. It mounts under the dash between the seats where it's out of the way for both the passenger and the driver. It draws engine heat directly from the coolant lines to heat your cab just like a traditional car heater. With adjustable temperature fan speeds, you'll be riding in luxury all winter long. </p><h2>Defrosts Your Windshield </h2> <p> Along with the two vents in the unit itself, we include two defrost vents and hoses to keep your windshield snow, ice, and fog free while you're driving! We route the defrost vents through your dash so they look like they came included from the factory.</p><h3> Keeps Your Cab Comfortable </h3> <p> Our Cab Heater is designed to make your cab comfortable while you're riding. The high-grade radiator hoses are rated from -40°F to 285°F. That means that no matter how hot your engine gets or how cold it is outside, our heater and its components can handle it. It's the best way to ride into winter.</p><h2>Need More Cab Enclosure Components? </h2> <p> Get the most out of your cab heater by completely sealing your UTV's cab with a roof, and front and rear windshields. Check out our selection of SuperATV Windshields. </p><h2>Cab Heater Features: </h2><ul><li>Adjustable temperature and fan speeds</li><li> 360° adjustable vents</li><li> High-grade radiator hoses—rated -40°F to 285°F</li><li> Includes defrost hoses and vents</li><li> 3.4 amps at 13.7 volts</li><li> Capable of 14,600 BTU at 135 CFM</li><li> Built-in shutoff valve</li><li> Heater control box measures 10" x 4.5" x 11.75"</li><li> Easy install—includes all installation hardware and instructions </li></ul><p><b> NOTE: Drilling through plastic and firewall required. All necessary bits are included. </b></p><p></p>

<h2> Ride All Winter Long </h2> <p> Now you can use your Ranger XP 900 year-round with SuperATV's Cab Heater keeping you warm. It mounts under the dash between the seats where it's out of the way for both the passenger and the driver. It draws engine heat directly from the coolant lines to heat your cab just like a traditional car heater. Install is easy—our kit uses the Ranger's own key on and power terminals to make wiring a cinch. We include hoses, drill-bits, and Ranger-specific mounting plates to make it as easy as possible to get your heater up and running. With adjustable temperature fan speeds you'll be riding in luxury all winter long. </p><h2> Defrosts Your Windshield </h2> <p> Along with the two vents in the unit itself, we include two defrost vents and hoses to keep your windshield snow, ice, and fog free while you're driving! We route the defrost vents through your dash so they look like they came included from the factory.</p><h2> Keeps Your Cab Comfortable </h2> <p> Our Cab Heater is designed to make your cab comfortable while you're riding. The high-grade radiator hoses are rated from -40°F to 285°F. That means that no matter how hot your engine gets or how cold it is outside, our heater and its components can handle it. It's the best way to ride into winter.</p><h2> Need More Cab Enclosure Components? </h2> <p> Get the most out of your cab heater by completely sealing your UTV's cab with a roof, and front and rear windshields. Check out our selection of SuperATV Windshields. </p><h2>Cab Heater Features: </h2><ul><li>Adjustable temperature and fan speeds</li><li> 360° adjustable vents</li><li> High-grade radiator hoses—rated -40°F to 285°F</li><li> Includes defrost hoses and vents</li><li> 3.4 amps at 13.7 volts</li><li> Capable of 14,600 BTU at 135 CFM</li><li> Built-in shutoff valve</li><li> Heater control box measures 10" x 4.5" x 11.75"</li><li> Easy install—includes all installation hardware and instructions </li></ul><p><b> NOTE: Drilling through plastic and firewall required. All necessary bits are included. </b></p>

<p>Stay warmer outside longer with a top-quality Polaris Ranger XP 900 Cab Heater with Defrost from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight, and includes everything you need to install it into your Polaris Ranger XP 900 including both the standard and crew cab models.</p><p>The NEW pre-thermostat plumbing gives you quicker and more consistent heat! Don&rsquo;t pay $100 for a thermostat bypass valve like you do with our competitor's kits.</p><p>It's built with SPAL high-performance fans, ensuring longevity and high performance and the fan comes with a 1-year warranty.</p><h2>Polaris Ranger XP 900 Inferno Cab Heater Features:</h2><ul><li>Direct-fit to your machine and hidden from sight.</li><li>Fits BOTH the Standard and Crew Cabs.</li><li>Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, ductwork &amp; wiring.</li><li>Factory cubby block-off plate included! Allows for hidden OEM look for the 2-floor louvers.</li><li>Includes OEM style rectangular defrost vents.</li><li>NEW Pre-thermostat plumbing gives this kit quicker and more consistent heat! Don&rsquo;t have to pay $100 for a thermostat bypass valve like you do with our competitor's kits.</li><li>SPAL multi-speed blower. SPAL is the world leader in high-performance fans and blowers, ensuring performance with longevity that is second to none. The fan has a 1-year warranty.</li><li>The custom multi-speed switch fits right into factory dash holes.</li><li>18,000 BTU heater.</li></ul><p><strong>About Inferno Heaters:</strong><br />Inferno&trade; Cabs Heaters is an OEM and Aftermarket Manufacturer of Cab Heaters for use in a wide range of applications. We take pride in producing top-quality products that we manufacture right here in the USA. All of our cab heaters come equipped with a SPAL blower and an aluminum heater core, meaning Inferno&trade; Cab Heaters are built with components that stand above our competition. This is the highest quality and most heavy-duty heater on the market, you will not be disappointed.</p><p>We made our mark as a producer of OEM-quality aftermarket cab heating kits for the UTV market. Nobody offers a full line of hidden direct-fit UTV heaters like the Inferno&trade; line of cab heaters. We bring in each machine and customize a heater that fits ONLY that machine. We design our heaters to be friendly to install and out of sight, making sure you have the cleanest and best-looking heater setup available. Our cab heater kits include all components needed for the complete installation of your machine. Take your UTV to the next level today and purchase an Inferno&trade; Cab Heater!</p>

<p>The Polaris Ranger XP 900 Firestorm Under Dash Heater by Motoalliance has a compact yet powerful design that will keep you nice and toasty without taking up your leg room. This highly efficient heat exchanger delivers 13,000 BTUs at 0-125 CFM, and features three adjustable fan speeds with its heavy-duty squirrel cage fan. Four dedicated outlet ports maximize airflow to the defrost vents and cabin, so you can get everything warmed up and ready to ride in no time at all. The high-grade radiator hose is rated to withstand temperatures ranging from -40 to 120 degrees celsius, making it extremely capable no matter what the climate.</p><p>This complete kit comes includes vehicle specific mounting brackets, hoses, stainless steel clamps, high grade Y connectors, aluminum hose fittings, defrost components, and all the necessary hardware you&rsquo;ll need for a painless installation. That means there&rsquo;s no excuse to suffer through the cold this winter. Put a powerful little heater under your dash and face the freezing trails in your perfectly warm and comfortable cab.</p><h2>Heater Features:</h2><ul><li>Highly efficient heat exchanger capable of 13,000 BTU at 0-125 CFM</li><li>Three (3) adjustable fan speeds and heavy-duty squirrel cage fan</li><li>Four (4) dedicated outlet ports to maximize airflow to the defrost vents and UTV cabin</li><li>Amp draw at full fan speed: 3.3 AMP</li><li>Four (4) 360&deg; Louvers and one (1) shutoff valve</li><li>High-grade radiator hose - rated -40&deg; to 120&deg; C</li><li>High performance alloy Y connectors</li><li>Defrost Components are included with every kit</li><li>Includes all necessary hardware and installation instructions</li><li><strong>Please Note:&nbsp;does&nbsp;NOT&nbsp;work with Ranger XP 1000 or XP 1000 Crew</strong></li></ul>

<p>When those colder hunting seasons hit, nothing is less bearable than the freezing ride to your spot. Your UTV is the perfect machine to get you to those off the beaten path spots, but in the colder months it&rsquo;s less than ideal to use without the perfect setup. That&rsquo;s why here at Everything Polaris Ranger we kept rider comfort in mind, and offer you this Inferno Cab Heater with Defrost. With this Cab Heater, your Polaris Ranger 570 will be the most comfortable ride for any hunt.</p><p>This cab heater is built to keep even the coolest ride warm with it&rsquo;s 18,000 BTU rating. The steel powder coated case ensures a product that is built to last. The included two speed Spal blower allows you to be able to control how much heat you really want. With the four adjustable louvers and switch that mounts into the factory Polaris panel, this Inferno Cab Heater solves all your UTV heating needs!</p><h2>Inferno Cab Heater w| Defrost Features:</h2><ul><li>18,000 BTU heater</li><li>Direct-fit to your machine and hidden from sight</li><li>Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, duct work &amp; wiring</li><li>Includes OEM style rectangular defrost vents</li><li>Includes shut-off valve</li><li>Pre-thermostat plumbing give this kit quicker and more consistent heat</li><li>Factory cubby block off plate included: allows for hidden OEM look for the 2 floor louvers</li><li>Custom multi-speed switch fits right into factory dash holes</li><li>SPAL multi-speed blower. SPAL is the world leader in high performance fans and blowers, ensuring performance with longevity that is second to none. Fan has 1 year warranty</li></ul>

<p>From the Designer of the Firestorm Heaters Kits comes our new and improved Ice Crusher UTV Heater Kits. We have more UTV Heater Kits and Application than anyone else! Our kits are used as OEM by some UTV manufacturers.</p><p>Ice Crusher UTV Heater Kits come with a compact yet powerful heater unit. All components are custom-made with custom laser cut, powder-coated mounting brackets to fit your model of UTV not just some generic bracket. Kits are supplied with custom CNC alloy Y hose connectors (kits requiring 5/8&Prime; or 3/4&Prime; Y&rsquo;s are made from nylon) or other fittings as required. Kits also include coolant hoses, EZ-Coils (used to stop the hoses from kinking), hose clamps, hole saws (for the heater hoses and Vent), grommets, shut off valve (if required), a wiring loom and terminals included, templates, dash vents and duct hose, your specific mounting bracket with hardware, and instructions. Note: Kit contents differ depending on your application.</p><p><b>Please Note:</b> Competent mechanical skills are required.</p><p>Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front louvers to direct the heat where you need it. The heater features a three-speed fan and temperature adjustment is located right on the 14,600 BTU* heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet. Kits are supplied with our custom CNC made alloy Y connectors which connect directly to the engine's cooling system. Comes with templates, mounting brackets, hoses, custom CNC made Y fittings, built-in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more.</p><p>Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more than capable of heating 99.99% of all UTV&rsquo;s</p><p>British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one-degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.</p><h2>****THERMOSTAT IS OPTIONAL</h2><h2><a href="%%GLOBAL_ShopPathSSL%%/polaris-ranger-ice-crusher-maxstat-inline-coolant-bypass-thermostat-for-utv-heaters-by-ice-crusher-heaters-ic-maxs.html" title="Inline Coolant Bypass Thermostat for UTV Heaters" target="_blank">Ice Crusher MaxStat &ndash; Inline Coolant Bypass Thermostat for UTV Heaters</a></h2><p>The MaxStat directs all engine coolant to your Ice Crusher Cab Heater, this means that the output of your heater will be at its maximum. If there is heat in your cooling system then you will have heat from your Ice Crusher Cab Heater. More heat means a warmer cab and in turn a warmer you!</p><p>MaxStat only opens to let coolant flow though the radiator when the cooling system requires it to keep the UTV engine at an optimal temperature.</p><h2><a href="https://everythingpolarisranger.com/polaris-ranger-hose-clamp-off-tools-by-ice-crusher-heaters-icch-hc1-epr.html" title="Ice Crusher install Clamp off Tool" target="_blank">Ice Crusher install Clamp off Tool (Make Heater Install Easier and Faster)</a></h2>

<h2>Polaris Ranger Hose Clamp Off Tools by Ice Crusher Heaters Features:</h2><p>Make your heater install faster and easier with Ice Crusher Hose Clamp Off Tools. These clamp tools will keep coolant from pouring out of your vehicle when tying into the coolant system. They also keep the majority of air from entering the coolant system dramatically reducing the effort required to remove air bubbles later. The clamps will seal-off flexible hoses up to 1 3/4" inch in diameter and will fit all ATV and UTV applications. Kits are sold in pair.</p><p></p><ul><li>Each line clamp is specially designed to stop flow without damaging or compromising the hose, making them a great set of clamps for any professional or home garage!</li><li>Fits Hose Sizes up 1 3/4'' OD Diameter</li><li>Designed to work with all ATV & UTV radiator hoses.</li><li>Speed up install and eliminate coolant loss</li><li>INCLUDES: 2 Clamps</li></ul>

<p>Polaris Ranger Ice Crusher Compact Cab Heater outstanding Heater Kit for the Do-It-Yourselfer out there. Use your cooling system to heat your cab! The heater kit includes a Three-speed fan and temperature adjustment knob on the front of the 14,600 BTU heater unit. Two forward-facing, 360-degree adjustable louvers direct the heat where you need it. The Heater unit includes an outlet port that connects defrost duct hose to a set of rotating vents that can be mounted in the vehicle dash. One additional rotating vent directs heat toward the footwell area. The kit is complete with a powder-coated<em> universal</em> mounting bracket which can attach via the 4 slotted mounting points, 6ft of 5/8'' premium heater hose, built-in shut off valve, stainless steel hose clamps, two machined aluminum Y fittings, duct hoses, hardware, wiring, hole saw, and instructions.</p><p></p><p><strong>Compact In-Cab <em>Universal</em> Heater Kit for 3/4'', 7/8'', 1" or 1 1/8'' Radiator Hose</strong></p>

<p>There are two kinds of Polaris Ranger owners &ndash; those who store their UTVs in the winter months and daydream for sunny green trails and those who won&rsquo;t let a little bit of snow and plummeting temperatures interfere with their work and play. If snow is your playground then the Firestorm UTV compact cab heater will ensure that you&rsquo;re going to have a long hot winter. You have complete control over the temperate, directional output of heat as well as the speed of the fans. And you won&rsquo;t be short on heat.</p><p>The Firestorm Cab Heater has a heat output of 14,600 BTU at 135 CFM and is absolutely capable of heating you right out of the cab when dialed up too high. The complete kit comes with everything you need for installation including vehicle specific mounting brackets, all necessary hoses, stainless steel clamps, aluminum hose fittings and electrical connectors - No extra trips to the hardware store required. When the freeze creeps up, you can turn to the defrost components to keep your windshields clear while riding the snow-covered trails and tackle the workload that won&rsquo;t wait for the spring thaw.</p><h2>Cab Heater Features:</h2><ul><li>Adjustable Temperature Settings and 360&deg; Louvers</li><li>Three (3) adjustable fan speeds and heavy duty squirrel cage fan</li><li>Built-in shutoff valve</li><li>Patented Unicoil for professional installation</li><li>High-grade radiator hose - rated -40&deg; to 120&deg; C</li><li>High-performance alloy Y connectors</li><li>Injection molded housing eliminates sharp corners and protects knees</li><li>Highly efficient heat exchanger capable of 14,600 BTU at 135 CFM</li><li>Defrost Components are included with every kit</li><li>Includes all necessary hardware and installation instructions</li><li>Dimensions: 5"(H) x 12"(W) x 13"(D)</li></ul><p>&nbsp;<p><b>Notes:</b></p></p><ul><li>Will NOT fit Ranger XP 900 models</li><li>Will NOT fit Midsize Ranger 570 models with Power Steering</li><li>The defrost vents WILL interfere with the Polaris After Market Full Steel Cab Enclosure</li><li>Will not achieve full heat unless operating at 3000-4000 rpms</li></ul>

<p>The Polaris Ranger 570 Full Size Firestorm Under Dash Heater by Motoalliance is the perfect solution to freezing your butt off in subzero temperatures. This powerful cab heater delivers up to 13,000 BTUs of heat to your ride. Three adjustable fan speeds let you control the heat, and four dedicated outlet ports maximize airflow to the defrost vents and UTV cabin. The high-grade radiator hose is rated for -40 degree to 120 degree celsius temperatures, giving you the ability to take on an extreme range of climates.</p><p>This complete kit includes vehicle specific mounting brackets, hoses, stainless steel clamps, aluminum hose fittings, high performance alloy Y connectors, and defrost components, so you&rsquo;ll have everything you need to make installation a breeze. Put the Firestorm Under Dash Heater on your rig, and you&rsquo;ll be outfitted to take on the coldest winters without having to suffer - because facing the cold without a good heater is a rookie mistake. A warm, comfortable rider is a smart, seasoned rider that knows how to take on the outdoors like a pro.</p><h2>Heater Features:</h2><ul><li>Highly efficient heat exchanger capable of 13,000 BTU at 0-125 CFM</li><li>Three (3) adjustable fan speeds and heavy-duty squirrel cage fan</li><li>Four (4) dedicated outlet ports to maximize airflow to the defrost vents and UTV cabin</li><li>Amp draw at full fan speed: 3.3 AMP</li><li>Four (4) 360&deg; Louvers and one (1) shutoff valve</li><li>High-grade radiator hose - rated -40&deg; to 120&deg; C</li><li>High performance alloy Y connectors</li><li>Defrost Components are included with every kit</li><li>Includes all necessary hardware and installation instructions</li></ul><p><span>Fitment: </span><span>&nbsp;</span><br /><span>- 2015-2023+ Ranger 570 Full Size&nbsp;</span></p>

<p>After the leaves have fallen and the first snow appears, you can keep on riding in comfort with a 16,000 BTU Rough Country heater installed in your Polaris Ranger XP 1000. Whether you&rsquo;re conducting snow removal work with a UTV plow system or doing a bit of wintertime trapping, you&rsquo;ll remain nice and toasty all year long with a Rough Country heater in place. Unlike other side-by-side heaters out there, the Rough Country heater provides near-instantaneous heat. Even when your bike is idling, this heater will still deliver. It comes with defroster vents to maintain visibility out your front windshield, as well as floor vents to blast your your feet, toes, and outer extremities with warm air. Using hoses that splice into your vehicle&rsquo;s cooling system as well as clamps, mounting brackets, and a network of ducts, Rough Country&rsquo;s Polaris Ranger XP 1000 heating system can move some serious heat without occupying any cab space. It fits flush with the existing dash and console, giving you a clean factory look. Ride till your heart&rsquo;s content no matter how cold the outside temperatures get by utilizing a high-grade Polaris Ranger XP 1000 heater like this one by Rough Country!</p><h2>Fan Heater Kit Features</h2><ul><li>Clean install - looks like a factory upgrade!</li><li>Warms cab quickly</li><li>Includes louvers for controlling defrost/floor heat</li><li>Includes everything needed for installation</li><li>4 fully adjustable louvers</li><li>16,000 BTUs</li><li>3-Year Warranty</li></ul><h2>In The Box</h2><h2>Parts</h2><ul><li>Heating system</li><li>Hoses</li><li>Clamps</li><li>Mounting brackets</li><li>Duct work</li><li>Vents</li><li>Rocker Switch</li><li>Wiring harness</li></ul><p>&amp;nbsp</p><p><strong>NOTES</strong></p><ul><li>Requires cutting</li></ul>

<p>This blower is a MUST for anyone who has tracks or carries heavy loads.</p><p>With the advent of and explosion of UTV sales the engineering of drivetrain systems have been pushed to the edge. Previously designed ATV components have been either adopted into the new UTV platforms or have been slightly tweaked to meet the engineering requirements. UTV&rsquo;s weigh more and carry more cargo than ever thought possible from an ATV platform.</p><p>The clutches and drive belt show up as a weak link as the added load is converted to wasted heat energy. This waste heat deteriorates drive belts, and breaks down composite bearing surfaces and parts which lead to increased inefficiency. This loss of efficiency only provides more ways to make heat and the vicious cycle repeats until failure. &ldquo;THE BLOW HOLE&rdquo; for UTV&rsquo;s brings our respected and valued snowmobile product along with its heat fighting abilities to increase the longevity of the drivetrain and ultimately your investment.</p><p>We developed this out of a desperate need to increase belt and clutch life on rental machines we have run on the sand dunes. Out in the extreme conditions of the sand dunes it has become commonplace to remove the belt covers in a desperate attempt to prevent belt failures. While removal of the cover does help with belt failures, the increased contact with the sand leads to premature clutch wear and failure. This is why we adapted &ldquo;THE BLOW HOLE&rdquo; to fit the UTV market. UTV&rsquo;s place extreme loads on their clutches and belt which builds extreme heat. This heat is your enemy. It leads to premature wear on your clutches, and complete belt failure. If you have ever had to change a belt then you know this is the last thing you want to be doing on the trail or out on the sand. &ldquo;THE BLOW HOLE&rdquo; for UTV&rsquo;s places a high output auxiliary fan in the cooling ducts of your clutch housing. It dramatically reduces ultimate temperatures generated in the clutch system and also speeds cooling of the clutch housing when traveling at lower speeds between high load events. Plug and Play with OEM connectors, and no cutting or drilling of stock components.</p><h2>MTNTK Blower Features:</h2><ul><li>Low amp draw DC fan (2.0 amp startup and 1.7amp continuous) does not over tax the electrical system. Motor is very water/dust resistant and designed to operate in adverse conditions</li><li>Heavy duty welded aluminum design is rugged enough to take abuse but lightweight</li><li>Pulls approximately 140 CFM (cubic feet per minute) of air through the clutch ductwork enhancing the OEM clutch fan</li><li>Air is removed from the clutch housing and fan installation does not inhibit or otherwise interfere with belt changes</li><li>Active venting system that expels hot air even at low ground speeds as opposed to OEM rpm dependent clutch mounted fan</li><li>Clutches and belt stay cooler which allows them to last longer and work better</li><li>Belt dust and other fine debris are essentially vacuumed out of the clutch cover area so clutches stay cleaner</li><li>Factory connector allows true plug and play install. Also allows quick disconnect for troubleshooting and repair work on machine</li></ul><p></p><p><strong>Featured Blog Post:</strong> <a href="%%GLOBAL_ShopPathSSL%%/epr-blog/2020/01/20/increasing-the-top-speed-of-your-polaris-ranger/" title="Learn about ways to increase the top speed of your Polaris Ranger.">Learn about ways to increase the top speed of your Polaris Ranger.</a></p>

<p>This Blower is a MUST for anyone who has tracks or carries heavy loads.</p><p>Increase the longevity of the drivetrain and ultimately your investment!</p><p>THE BLOW HOLE & for UTV's places a high output auxiliary fan in the cooling ducts of your clutch housing. It dramatically reduces ultimate temperatures generated in the clutch system and also speeds cooling of the clutch housing when traveling at lower speeds between high load events.</p><p> UTV's place extreme loads on their clutches and belt which builds extreme heat. This heat is your enemy. It leads to premature wear on your clutches and complete belt failure. If you have ever had to change a belt on the trail then you know this is the last thing you want to be doing when using your UTV.</p><p>Plug and Play with OEM connectors, and no cutting or drilling of stock components.</p><ul><li>Low amp draws DC fan (2.0 amp startup and 1.7amp continuous) does not overtax the electrical system. The motor is very water/dust resistant and designed to operate in adverse conditions</li><li>Heavy-duty welded aluminum design is rugged enough to take abuse but lightweight</li><li>Pulls approximately 140 CFM (cubic feet per minute) of air through the clutch ductwork enhancing the OEM clutch fan</li><li>Air is removed from the clutch housing and fan installation does not inhibit or otherwise interfere with belt changes</li><li>Active venting system that expels hot air even at low ground speeds as opposed to OEM rpm dependant clutch mounted fan</li><li>Clutches and belt stay cooler which allows them to last longer and work better</li><li>Belt dust and other fine debris are essentially vacuumed out of the clutch cover area so clutches stay cleaner</li><li>The factory connector allows true plug and play install. Also allows quick disconnect for troubleshooting and repair work on the machine</li></ul>

<p>From the Designer of the Firestorm Heaters Kits comes our new and improved Ice Crusher UTV Heater Kits. We have more UTV Heater Kits and Application than anyone else! Our kits are used as OEM by some UTV manufacturers.</p><p>Ice Crusher UTV Heater Kits come with a compact yet powerful heater unit. All components are custom-made with custom laser cut, powder-coated mounting brackets to fit your model of UTV not just some generic bracket. Kits are supplied with custom CNC alloy Y hose connectors (kits requiring 5/8&Prime; or 3/4&Prime; Y&rsquo;s are made from nylon) or other fittings as required. Kits also include coolant hoses, EZ-Coils (used to stop the hoses from kinking), hose clamps, hole saws (for the heater hoses and Vent), grommets, shut off valve (if required), a wiring loom and terminals included, templates, dash vents and duct hose, your specific mounting bracket with hardware, and instructions. Note: Kit contents differ depending on your application.</p><p><b>Please Note:</b> Competent mechanical skills are required.</p><p>Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front louvers to direct the heat where you need it. The heater features a three-speed fan and temperature adjustment is located right on the 14,600 BTU* heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet. Kits are supplied with our custom CNC made alloy Y connectors which connect directly to the engine's cooling system. Comes with templates, mounting brackets, hoses, custom CNC made Y fittings, built-in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more.</p><p>Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more than capable of heating 99.99% of all UTV&rsquo;s</p><p>British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one-degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.</p><h2>****THERMOSTAT IS OPTIONAL</h2><h2><a href="%%GLOBAL_ShopPathSSL%%/polaris-ranger-ice-crusher-maxstat-inline-coolant-bypass-thermostat-for-utv-heaters-by-ice-crusher-heaters-ic-maxs.html" title="Inline Coolant Bypass Thermostat for UTV Heaters" target="_blank">Ice Crusher MaxStat &ndash; Inline Coolant Bypass Thermostat for UTV Heaters</a></h2><p>The MaxStat directs all engine coolant to your Ice Crusher Cab Heater, this means that the output of your heater will be at its maximum. If there is heat in your cooling system then you will have heat from your Ice Crusher Cab Heater. More heat means a warmer cab and in turn a warmer you!</p><p>MaxStat only opens to let coolant flow though the radiator when the cooling system requires it to keep the UTV engine at an optimal temperature.</p><h2><a href="https://everythingpolarisranger.com/polaris-ranger-hose-clamp-off-tools-by-ice-crusher-heaters-icch-hc1-epr.html" title="Ice Crusher install Clamp off Tool" target="_blank">Ice Crusher install Clamp off Tool (Make Heater Install Easier and Faster)</a></h2><p></p>

<p>The Fortress Air Bar is powered by a 12-volt, 75-watt motor which supplies evenly distributed air flow across its 39" opening. The Air Bar has a sleek low-profile design that blends discreetly into the frame of your Polaris Ranger. The rheostat offers you full control over the speed of your Air Bar.</p>

<p>You don&rsquo;t have to dress like an Eskimo to stay warm when you ride, nor do you have to suffer through the winter feeling frozen all the time. With a Rough Country heating system installed in your Polaris Ranger, you&rsquo;ll have everything you need to remain nice and toasty all year round. This heater kit doesn't just contain the heater core. Rather, it comes as a complete package that includes the heating hoses, clamps, heating ducts, mounts, heating controls, and all the required wiring / wire harnesses. If you need something to maintain clear visibility, the Rough Country heater comes with adjustable defrosting louvers. And if you&rsquo;d like to direct warm air at your feet, this heater kit also has floor louvers. While full cab enclosures can help insulate the cockpit of your side-by-side, with a heating kit this powerful installed in your Polaris Ranger, you may not even need to enclose your rig!</p><h2>Fan Heater Kit Features</h2><ul><li>Clean install - looks like a factory upgrade!</li><li>Warms cab quickly</li><li>Includes louvers for controlling defrost/floor heat</li><li>Includes everything needed for installation</li><li>4 fully adjustable louvers</li><li>16,000 BTUs</li><li>3-Year Warranty</li></ul><h2>In The Box</h2><h2>Parts</h2><ul><li>Heating system</li><li>Hoses</li><li>Clamps</li><li>Mounting brackets</li><li>Duct work</li><li>Vents</li><li>Rocker Switch</li><li>Wiring harness</li></ul><p>&nbsp;</p><p><strong>Notes</strong></p><ul><li>Requires cutting</li></ul>

<p>Stay warmer outside longer with a top-quality Polaris Ranger 800 Cab Heater with Defrost from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight and includes everything you need to install it into your Polaris Ranger 800&nbsp; including both the standard and crew cab models.</p><p>Its built with SPAL high-performance fans, ensuring longevity and high performance and the fan comes with a 1-year warranty.</p><h2>Polaris Ranger 800 Inferno Cab Heater Features:</h2><ul><li>Direct-fit to your machine and hidden from sight.</li><li>Fits BOTH the Standard and Crew Cabs.</li><li>Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, ductwork &amp; wiring.</li><li>SPAL multi-speed blower. SPAL is the world leader in high-performance fans and blowers, ensuring performance with longevity that is second to none. The fan has a 1-year warranty.</li><li>The custom multi-speed switch fits right into factory dash holes.</li><li>18,000 BTU heater</li></ul><table class="woocommerce-product-attributes shop_attributes"><tbody><tr class="woocommerce-product-attributes-item woocommerce-product-attributes-item--weight"><th class="woocommerce-product-attributes-item__label">Weight</th><td class="woocommerce-product-attributes-item__value">14 lbs</td></tr><tr class="woocommerce-product-attributes-item woocommerce-product-attributes-item--dimensions"><th class="woocommerce-product-attributes-item__label">Dimensions</th><td class="woocommerce-product-attributes-item__value">12 &times; 12 &times; 12 in</td></tr></tbody></table>

<p>Once you&rsquo;ve installed your full cab enclosure and you&rsquo;re ready to take to the trails in any season, make sure you&rsquo;re prepared for heading out into colder climates. By itself, an enclosure can limit moisture and wind from entertain but that doesn&rsquo;t do anything for the bone-jarring cold that will leave you shivering in your cab. The 20,000 BTU cab heater is everything you need to stay warm and safe. If your windows start to ice over and you need to keep your windshield clear use the included defroster settings. You won&rsquo;t need to switch between them &ndash; there are additional lower vents that feed heat directly into your cab enclosure. Be careful; a more comfortable and toasty ride in the offseason could result in spending a lot more time on the trails.</p><h2>Cab Heater Features:</h2><ul><li>Defroster</li><li>Two lower vents (driver and passenger)</li><li>Installs directly inside cab</li><li>20,000 BTU maximum per hour output</li></ul>

<p>Stay warmer outside longer with a top-quality Polaris Ranger 570 Full-Size Cab Heater with Defrost for 2017-current models from Inferno Cab Heaters. This complete heater kit is a direct fit, hidden from sight, and includes everything you need to install it into your Polaris Ranger 570 Full-Size (2017-current) including both the standard and crew cab models.</p><p>The NEW pre-thermostat plumbing gives you quicker and more consistent heat! Don't pay $100 for a thermostat bypass valve like you do with our competitor's kits.</p><p>It's built with SPAL high-performance fans, ensuring longevity and high performance and the fan comes with a 1-year warranty.</p><h2>Polaris Ranger 570 Full-Size Inferno Cab Heater Features:</h2><ul><li>Direct-fit to your machine and hidden from sight.</li><li>Includes all necessary components: heater hose, hose splicers, hose clamps, mounting brackets, defrost and floor louvers, ductwork &amp; wiring.</li><li>NEW Pre-thermostat plumbing gives this kit quicker and more consistent heat! Don't have to pay $100 for a thermostat bypass valve like you do with our competitor's kits.</li><li>SPAL multi-speed blower. SPAL is the world leader in high-performance fans and blowers, ensuring performance with longevity that is second to none. The fan has a 1-year warranty.</li><li>The custom multi-speed switch fits right into factory dash holes.</li><li>18,000 BTU heater.</li></ul><p><strong>About Inferno Heaters:</strong><br />Inferno&trade; Cabs Heaters is an OEM and Aftermarket Manufacturer of Cab Heaters for use in a wide range of applications. We take pride in producing top-quality products that we manufacture right here in the USA. All of our cab heaters come equipped with a SPAL blower and an aluminum heater core, meaning Inferno&trade; Cab Heaters are built with components that stand above our competition. This is the highest quality and most heavy-duty heater on the market, you will not be disappointed.</p><p>We made our mark as a producer of OEM-quality aftermarket cab heating kits for the UTV market. Nobody offers a full line of hidden direct-fit UTV heaters like the Inferno&trade; line of cab heaters. We bring in each machine and customize a heater that fits ONLY that machine. We design our heaters to be friendly to install and out of sight, making sure you have the cleanest and best-looking heater setup available. Our cab heater kits include all components needed for the complete installation of your machine. Take your UTV to the next level today and purchase an Inferno&trade; Cab Heater!</p>

<p>From the Designer of the Firestorm Heaters Kits comes our new and improved Ice Crusher UTV Heater Kits. We have more UTV Heater Kits and Application than anyone else! Our kits are used as OEM by some UTV manufacturers.</p><p>Ice Crusher UTV Heater Kits come with a compact yet powerful heater unit. All components are custom-made with custom laser cut, powder-coated mounting brackets to fit your model of UTV not just some generic bracket. Kits are supplied with custom CNC alloy Y hose connectors (kits requiring 5/8&Prime; or 3/4&Prime; Y&rsquo;s are made from nylon) or other fittings as required. Kits also include coolant hoses, EZ-Coils (used to stop the hoses from kinking), hose clamps, hole saws (for the heater hoses and Vent), grommets, shut off valve (if required), a wiring loom and terminals included, templates, dash vents and duct hose, your specific mounting bracket with hardware, and instructions. Note: Kit contents differ depending on your application.</p><p><b>Please Note:</b> Competent mechanical skills are required.</p><p>Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front louvers to direct the heat where you need it. The heater features a three-speed fan and temperature adjustment is located right on the 14,600 BTU* heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet. Kits are supplied with our custom CNC made alloy Y connectors which connect directly to the engine's cooling system. Comes with templates, mounting brackets, hoses, custom CNC made Y fittings, built-in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more.</p><p>Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more than capable of heating 99.99% of all UTV&rsquo;s</p><p>British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one-degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.</p><h2>****THERMOSTAT IS OPTIONAL</h2><h2><a href="%%GLOBAL_ShopPathSSL%%/polaris-ranger-ice-crusher-maxstat-inline-coolant-bypass-thermostat-for-utv-heaters-by-ice-crusher-heaters-ic-maxs.html" title="Inline Coolant Bypass Thermostat for UTV Heaters" target="_blank">Ice Crusher MaxStat &ndash; Inline Coolant Bypass Thermostat for UTV Heaters</a></h2><p>The MaxStat directs all engine coolant to your Ice Crusher Cab Heater, this means that the output of your heater will be at its maximum. If there is heat in your cooling system then you will have heat from your Ice Crusher Cab Heater. More heat means a warmer cab and in turn a warmer you!</p><p>MaxStat only opens to let coolant flow though the radiator when the cooling system requires it to keep the UTV engine at an optimal temperature.</p><h2><a href="https://everythingpolarisranger.com/polaris-ranger-hose-clamp-off-tools-by-ice-crusher-heaters-icch-hc1-epr.html" title="Ice Crusher install Clamp off Tool" target="_blank">Ice Crusher install Clamp off Tool (Make Heater Install Easier and Faster)</a></h2><p></p>

<strong>An Idle Flow Pump Warms Up Your Heater Fast</strong>Your UTV cab heater takes ages to warm up when your machine's idling on a cold day. That’s why you need to add SuperATV’s UTV Cab Heater Idle Flow Pump to your existing cab heater. It forces coolant through your engine and heater core so you can blow warm air while idling.<ul> <li>Designed to work with SuperATV Cab Heaters</li> <li>Delivers hot air in as little as 30 seconds</li> <li>Forces coolant through your engine while idling</li></ul><strong>Warm Up your Heater in as Little as 30 Seconds</strong>By forcing coolant through your engine and UTV cab heater core, you can start moving hot air in as little as thirty seconds. Finally, you can start your side-by-side and let it warm up without freezing your butt off!<strong>Kit Includes:</strong><ul> <li>Idle flow pump</li> <li>Mounting bracket</li> <li>Wiring harness</li> <li>12 inches of 3/4” heater hose</li> <li>(6) hose clamps</li> <li>(2) hose splices (1/2” x 5/8”)</li> <li>All hardware</li> <li>Access to instructions</li></ul><strong>Flow Pump Features:</strong><ul> <li>Designed to work with SuperATV Cab Heaters or any other UTV heater</li> <li>Warm up your UTV cab heater core in as little as 30 seconds</li> <li>Actively pumps coolant through your engine and heater while idling</li></ul>

<p>From the Designer of the Firestorm Heaters Kits comes our new and improved Ice Crusher UTV Heater Kits. We have more UTV Heater Kits and Application than anyone else! Our kits are used as OEM by some UTV manufacturers.</p><p>Ice Crusher UTV Heater Kits come with a compact yet powerful heater unit. All components are custom-made with custom laser cut, powder-coated mounting brackets to fit your model of UTV not just some generic bracket. Kits are supplied with custom CNC alloy Y hose connectors (kits requiring 5/8&Prime; or 3/4&Prime; Y&rsquo;s are made from nylon) or other fittings as required. Kits also include coolant hoses, EZ-Coils (used to stop the hoses from kinking), hose clamps, hole saws (for the heater hoses and Vent), grommets, shut off valve (if required), a wiring loom and terminals included, templates, dash vents and duct hose, your specific mounting bracket with hardware, and instructions. Note: Kit contents differ depending on your application.</p><p><b>Please Note:</b> Competent mechanical skills are required.</p><p>Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front louvers to direct the heat where you need it. The heater features a three-speed fan and temperature adjustment is located right on the 14,600 BTU* heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet. Kits are supplied with our custom CNC made alloy Y connectors which connect directly to the engine's cooling system. Comes with templates, mounting brackets, hoses, custom CNC made Y fittings, built-in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more.</p><p>Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more than capable of heating 99.99% of all UTV&rsquo;s</p><p>British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one-degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.</p><h2>****THERMOSTAT IS OPTIONAL</h2><h2><a href="%%GLOBAL_ShopPathSSL%%/polaris-ranger-ice-crusher-maxstat-inline-coolant-bypass-thermostat-for-utv-heaters-by-ice-crusher-heaters-ic-maxs.html" title="Inline Coolant Bypass Thermostat for UTV Heaters" target="_blank">Ice Crusher MaxStat &ndash; Inline Coolant Bypass Thermostat for UTV Heaters</a></h2><p>The MaxStat directs all engine coolant to your Ice Crusher Cab Heater, this means that the output of your heater will be at its maximum. If there is heat in your cooling system then you will have heat from your Ice Crusher Cab Heater. More heat means a warmer cab and in turn a warmer you!</p><p>MaxStat only opens to let coolant flow though the radiator when the cooling system requires it to keep the UTV engine at an optimal temperature.</p><h2><a href="https://everythingpolarisranger.com/polaris-ranger-hose-clamp-off-tools-by-ice-crusher-heaters-icch-hc1-epr.html" title="Ice Crusher install Clamp off Tool" target="_blank">Ice Crusher install Clamp off Tool (Make Heater Install Easier and Faster)</a></h2>

<p>From the Designer of the Firestorm Heaters Kits comes our new and improved Ice Crusher UTV Heater Kits. We have more UTV Heater Kits and Application than anyone else! Our kits are used as OEM by some UTV manufacturers.</p><p>Ice Crusher UTV Heater Kits come with a compact yet powerful heater unit. All components are custom-made with custom laser cut, powder-coated mounting brackets to fit your model of UTV not just some generic bracket. Kits are supplied with custom CNC alloy Y hose connectors (kits requiring 5/8&Prime; or 3/4&Prime; Y&rsquo;s are made from nylon) or other fittings as required. Kits also include coolant hoses, EZ-Coils (used to stop the hoses from kinking), hose clamps, hole saws (for the heater hoses and Vent), grommets, shut off valve (if required), a wiring loom and terminals included, templates, dash vents and duct hose, your specific mounting bracket with hardware, and instructions. Note: Kit contents differ depending on your application.</p><p><b>Please Note:</b> Competent mechanical skills are required.</p><p>Use your cooling system to heat your cab! From the original designer of the Firestorm UTV Cab Heaters comes our new and improved Ice Crusher Compact UTV Heaters. This Ice Crusher Under Dash Compact Heater kit has two 360 adjustable front louvers to direct the heat where you need it. The heater features a three-speed fan and temperature adjustment is located right on the 14,600 BTU* heater unit. The heater mounts under the center of the dash which leaves plenty of room for your feet. Kits are supplied with our custom CNC made alloy Y connectors which connect directly to the engine's cooling system. Comes with templates, mounting brackets, hoses, custom CNC made Y fittings, built-in shut off valve, clamps, hardware, wiring, hole saw, instructions, and more.</p><p>Heater BTU# output is theoretical and is dependent on the coolant temperature of the UTV and the flow rate of the coolant, which varies by UTV and engine RPM. Outside (ambient) temperature the UTV is being operated in also can change heater output. That being said these 14,600 BTU Heater Units are more than capable of heating 99.99% of all UTV&rsquo;s</p><p>British Thermal Unit (BTU or Btu) is a traditional unit of work needed to raise the temperature of one pound of water by one-degree Fahrenheit. One four-inch wooden kitchen match consumed completely generates approximately 1 BTU.</p><h2>****THERMOSTAT IS OPTIONAL</h2><h2><a href="%%GLOBAL_ShopPathSSL%%/polaris-ranger-ice-crusher-maxstat-inline-coolant-bypass-thermostat-for-utv-heaters-by-ice-crusher-heaters-ic-maxs.html" title="Inline Coolant Bypass Thermostat for UTV Heaters" target="_blank">Ice Crusher MaxStat &ndash; Inline Coolant Bypass Thermostat for UTV Heaters</a></h2><p>The MaxStat directs all engine coolant to your Ice Crusher Cab Heater, this means that the output of your heater will be at its maximum. If there is heat in your cooling system then you will have heat from your Ice Crusher Cab Heater. More heat means a warmer cab and in turn a warmer you!</p><p>MaxStat only opens to let coolant flow though the radiator when the cooling system requires it to keep the UTV engine at an optimal temperature.</p><h2><a href="https://everythingpolarisranger.com/polaris-ranger-hose-clamp-off-tools-by-ice-crusher-heaters-icch-hc1-epr.html" title="Ice Crusher install Clamp off Tool" target="_blank">Ice Crusher install Clamp off Tool (Make Heater Install Easier and Faster)</a></h2><p></p>