Elsword

<p>No matter what shape your UTV&rsquo;s rear is in, you can always refurbish it with our Polaris Full-Size XP 1000 Ranger Rear Bumper. The steel tubing used in it has exactly the same diameter as the OEM front bumper making for an appearance of a matching pair. To give its competitors a run for their money, these bumpers are metal bead blasted before they are powder coated for the best possible finish prep. For supreme durability and the ability to stand up to impact, these Rear Bumpers are powder coated with Black Wrinkle (Textured). Unlike its competition whose bumpers don't tilt with the Ranger's dump bed, Polaris Full Size Ranger Rear Bumper tilts smoothly with the bed! This rear bumper has been engineered to facilitate UTV&rsquo;s users to the best of capacities. It comes with a complete instruction manual that can be easily comprehended and has step-by-step guidelines with all the necessary mounting hardware. This product with its robust construction guarantees 100 percent satisfaction to its users.</p><h2>Ranger 1000 Bumper Features:</h2><ul><li>100% MADE IN USA.</li><li>Same tube size as OEM front bumper.</li><li>Constructed of steel.</li><li>Unlike all other competitors, our bumpers are metal bead blasted before they are powder coated for the best possible finish prep.</li><li>Powder-coated Black Wrinkle (Textured) for supreme durability.</li><li>Bumper tilts with the bed.</li><li>Very easy to install.</li><li>Complete installation instructions included.</li><li>All mounting hardware included.</li><li>Satisfaction guaranteed.</li></ul><table border="1" cellpadding="1" cellspacing="1" style="width: 517px; height: 228px;"><tbody><tr><td scope="col">Ranger 1000</td><td>'20-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger XP 1000</td><td>'18-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger 1000 EPS</td><td>'20-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger 1000 Premium</td><td>'20-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger Crew 1000</td><td>'20-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger Crew XP 1000</td><td>'19-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger Crew 1000 EPS</td><td>2020</td></tr><tr><td scope="col">Ranger Crew 1000 Premium</td><td>'20-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger XP 1000 High Lifter Edition</td><td>'19-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger XP 1000 High Lifter Edition Crew</td><td>'19-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger XP 1000 Texas Edition</td><td>'19-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger XP 1000 Texas Edition Crew</td><td>'19-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger XP 1000 North Star Edition</td><td>'18-<span><strong>21+</strong></span></td></tr><tr><td scope="col">Ranger XP 1000 Crew North Star Edition</td></tr></tbody></table>

<p>Extreme Metal Products' rear bumpers add heavy-duty protection and style to your utility vehicle! This Polaris Ranger XP 900 Rear Bumper is fabricated and laser-cut from tough American steel right here in the USA. All welds are ground smooth with a finish grinder to give this bumper a uniform, attractive appearance. They're specifically designed for your Polaris Ranger XP 900 and Ranger 570, ensuring a perfect fit.</p><p>The high-quality rear bumper for Ranger is the best fit made out of the metal products. It provides maximum protection along with style adding on to UTV protection against high-quality material. The all American style steel is there for the backing for the Ranger. It is tough and lasts for long with the Ranger owners. The bumpers are made out of heavy metal which keeps the utility best for the vehicle. It has laser cut and fabrication made in the USA. The smooth edges of the welding keep it uniform and have given it a shape of an attractive appearance.</p><h2>Rear Bumper Features:</h2><ul><li>Made from 1/8" and 3/16" thick American Steel</li><li>No cutting or welding needed to install</li><li>Laser cut and CNC formed for a great fit</li><li>Dumps with the bed</li><li>Laser Cut "EMP" logo</li><li>Made in the USA</li><li>High-quality performance and design</li><li>Laser cut with smooth edges</li></ul>

<h2>Front Bumper Features:</h2><ul><li>38mm x 1.5mm tubular steel</li><li>Bolt on design, no drilling necessary</li><li>Multiple frame mounting points for added strength</li><li>Headlight protection</li><li>Full coverage, heavy-duty look</li><li>Designed for farm, ranch, forestry or racing applications</li></ul>

<p>Our Polaris Ranger Rear Bumpers are engineered with precision to match the contour of your UTV, giving it a custom look while providing ultimate convenience and protection. Our bumpers will keep your Ranger safe from impacts and collisions, ensuring you get maximum performance and longevity from your machine. It also provides easy access to your storage bed.</p><p>Each Rear bumper accommodates built-in LED pod light brackets making installing any lighting options a breeze.</p><p>Our bumpers are available in a variety of models, so you can choose the one that fits your specific UTV perfectly. Our custom design adds a touch of style and attitude to your machine while keeping it safe from damage.</p><h2>Rear Bumper Features:</h2><ul><li>1.5" & 1.75" durable steel tube design.</li><li>High-quality powder coat designed to take the abuse.</li><li>Convenience for accessing storage bed</li><li>Built-in LED light pod and light bar mounting brackets.</li><li>DIY installation</li></ul>

<p>Enhance the protection and style of your Polaris Ranger with the Kemimoto Front Bumper and Brush Guard. This heavy-duty accessory is designed to withstand rugged off-road conditions and provide reliable front-end protection. Crafted with durability in mind, the bumper is constructed from high-quality materials to ensure long-lasting performance.</p><p>Not only does it shield your vehicle from potential damage, but it also adds a sleek and aggressive look to your Polaris Ranger. The front brush guard offers an extra layer of defense, safeguarding against branches, debris, and other obstacles during your outdoor adventures.</p><p>The installation process is hassle-free, with a precise fit that seamlessly integrates with your Polaris Ranger. All necessary hardware and instructions are included, allowing for a quick and easy setup. Trust Kemimoto to deliver a reliable and stylish front bumper and brush guard to enhance your off-road experience and keep your Polaris Ranger protected.</p><p>Replacement for # 2882531</p>

<h2>XP 1000 Winch Ready Rear Bumper Why We Make It</h2> <p>SuperATV's Ranger Rear Winch Ready Bumper is the perfect blend of style and performance. With the rider in mind, SuperATV is thrilled to offer a rear bumper that is designed to fit your individual riding needs. For the leader of the pack who is constantly winching friends, our extra-sturdy bumper offers a custom mount pre-fit for our 3500 lb. winch, creating an easy install and go for the much needed rear winch. Or, slip in a 12" LED light bar for added visibility for the early morning or late night rides - pair the light bar with the 3" LED recessed cube lights and you have an ideal match! Each bumper comes with two super duty D-ring mounts for added ease of hauling or pulling.</p><p>SuperATV spared no detail in the design and engineering of the Ranger rear bumper. Each cube light has a precut hole specifically designed for optimal visibility, giving you a wider range of sight. Utilize a SuperATV or comparable winch and find the holes predrilled for drop and go install.</p><h2>Features :</h2><ul><li>3mm (1/8") thick sheet metal</li><li>2 D-Ring mounts</li><li>Precut holes for 3" LED recessed cube lights</li><li>Pre-fit for our 3500 lb. winch or 12" LED light bar</li><li>Winch mounting bolt pattern:<ul><li>3.0" x 4.87" (76 x 124mm)</li></ul></li></ul> <p>&nbsp;<p><b>NOTE:<ul><li>12" light bar and winch can not be used in combination with this bumper.</li><li>Does NOT come with a winch.</li></ul></b></p></p>

<h2>Rear Bumper Specifications:</h2><ul><li>100% MADE IN THE USA.</li><li>Same tube size as OEM front bumper.</li><li>Constructed of steel.</li><li>Unlike all other competitors, our bumpers are metal bead blasted before they are powder coated for the best possible finish prep.</li><li>Powder coated Black Wrinkle (Textured) for supreme durability.</li><li>Bumper tilts with the bed.</li><li>Very easy to install.</li><li>Complete installation instructions included .</li><li>All mounting hardware included.</li><li>Satisfaction guaranteed.</li></ul>

<p>The Extreme Full-size Polaris Ranger Rear Bumper by Extreme Metal Products is perfect for protecting the rear of your Polaris Ranger. This bumper will take the beating and abuse a hardworking, trail riding machine was meant to endure! No more fear of damaging the rear of your Polaris Ranger with this sturdy, extreme rear bumper installed on your UTV! Help ensure your machine looks and performs great for years to come -- Trust us, it's worth the investment!</p><p>Manufactured of thick All American steel, the Polaris Ranger 800 Rear Bumper was built to for the long haul ahead! Featuring a black, powder-coated finish for superior protection, no corners were cut by EMP in the engineering of this high-quality product! They've even taken the time to weld and grind smooth all joints, for a stylish look -- an impressive attention to detail on an impressive product! </p><p>Installation is a breeze! This rear bumper mounts in the same location as the factory provided bumper, and all necessary mounting hardware and easy-to-follow instructions are included. </p><p>This product is produced by EMP, it is specifically designed to protect your vehicle from any kind of damage; it is a Polaris Ranger Rear Bumper. This bumper is constructed of 0.125" thick American steel and is coated with black powder which adds to its protection quality and durability. The major advantage of this product is that it is easily and quickly installed. All joints and corners are welded and grinded for smoothness, and it also adds to the beauty of the product. This product is made in the United States of America, and the mounting brackets are made from 0.188" thick American steel.</p><h2>Rear Bumper Features:</h2><ul><li>Installs in just minutes to the same location as the factory bumper</li><li>Manufactured from 0.125" thick (11 gauge) American steel</li><li>Mounting Brackets made from 0.188" thick American steel</li><li>Laser cut and formed from one piece of steel</li><li>Ends are welded and ground smooth</li><li>Black powder-coated for superior protection</li><li>Rotates with the bed to allow for dumping -- even with most trailer hitches installed</li><li>Complete with a custom laser-cut "EMP" logo</li><li>Made in the USA</li><li>Ends and corners are welded for smoothness. </li><li>Coated with black powder for further durability.</li></ul><p><p><b>Note: Does NOT fit the Polaris Mid-Size Rangers or the Ranger XP900.</b></p></p>

<p>Add some protection to your Polaris Ranger with our brand new rear bumper. The B&M Fabrications Ranger Rear Bumper built to be tough without sacrificing style.</p><p>Our new Ranger Rear Bumper is compatible with the Ranger NorthStar Edition. Sturdy Bumper mounting in the center as well as to the bed ends. </p>

<h2>Why We Make It</h2> <p>SuperATV's Ranger Rear Winch Ready Bumper is the perfect blend of style and performance. With the rider in mind, SuperATV is thrilled to offer a rear bumper that is designed to fit your individual riding needs. For the leader of the pack who is constantly winching friends, our extra-sturdy bumper offers a custom mount pre-fit for our 3500 lb. winch, creating an easy install and go for the much needed rear winch. Or, slip in a 12" LED light bar for added visibility for the early morning or late night rides - pair the light bar with the 3" LED recessed cube lights and you have an ideal match! Each bumper comes with two super duty D-ring mounts for added ease of hauling or pulling.</p><p>SuperATV spared no detail in the design and engineering of the Ranger rear bumper. Each cube light has a precut hole specifically designed for optimal visibility, giving you a wider range of sight. Utilize a SuperATV or comparable winch and find the holes predrilled for drop and go install.</p><h2>Features :</h2><ul><li>3mm (1/8") thick sheet metal</li><li>2 D-Ring mounts</li><li>Precut holes for 3" LED recessed cube lights</li><li>Pre-fit for our 3500 lb. winch or 12" LED light bar</li><li>Winch mounting bolt pattern:<ul><li>3.0" x 4.87" (76 x 124mm)</li></ul></li></ul> <p>&nbsp;<p><b>NOTE:<ul><li>12" light bar and winch can not be used in combination with this bumper.</li><li>Does NOT come with a winch.</li></ul></b></p></p>

<p>Whether you are going out hunting, working on the ranch or just exploring unfamiliar territory, you need to have the best possible protection for your Polaris Ranger. We've got the ideal accessory for you. The Polaris Ranger Full-size Rear Extreme Bumper With Side Bed Guards provides coverage on the back of your machine, while the side guards protect the driver and passenger sides of your Polaris Ranger UTV.</p><p>SuperATV's Polaris Ranger Full-Size Rear Extreme Bumper With Side Bed Guards is constructed of sturdy and durable aluminum that can protect your ride on many a rocky trail. The bumper and side guards are coated with a wrinkle black powder coat finish that will not only give it a sleek look but will also increase its lifespan. The unit includes all the necessary mounting hardware and installation instructions.</p><h2> Rear Extreme Bumper With Side Bed Guards Features:</h2><ul><li>Aggressive New Look for your Machine</li><li>Heavy-duty Bumper &amp; Side Guards</li><li>Black Powder Coated Finish for Added Durability</li><li>Includes All Mounting Hardware</li></ul><p><p><b>Notes:</b> This will not fit Ranger Midsize or Ranger XP 1000 NorthStar Edition</p></p>

<p>Add function and style to the front end of your Ranger with the Heavy Duty Front Bumper. Mount your winch on top keeping it out of the mud and water. No more bending over to reach your winch cable.</p><h2>Polaris Ranger 800 Front Bumper Features:</h2><ul><li>Replaces your stock front bumper.</li><li>Allows you to mount a winch on top.</li><li>Laser-cut and formed for a great fit.</li><li>All welds are ground smooth.</li><li>Made from 1/8" thick American Steel.</li><li>Mounting brackets are 3/16" American Steel.</li><li>Texture powder coated for superior protection and style.</li><li>Shown with optional Bull Bar (sold seperately 693-6709-00 )</li></ul><p>**** Will NOT fit Mid-Size Rangers or the Ranger 900 XP .*****</p>

<h2>Strength to Do More</h2><p>SuperATV’s Polaris Ranger XP 1000 Front Bumper is the perfect blend of strength, style, and utility. We make it with heavy-duty sheet steel to make sure it gets you through every challenge you face. It’s not just tough — we packed this bumper full of features so you’re ready for anything.</p><h2>Made for Utility</h2><p>This bumper features a built-in winch mounting surface compatible with 3500, 4500, and 5000 lb Black Ops Winches. We even include a fairlead adapter to match multiple winch drum sizes. You also get two D-ring shackles that make winching recoveries even easier.</p><h2>Light Up the Night</h2><p>Bring out the light bars! This bumper can support up to a 12-inch light bar and has cutouts for recessed cube lights. Using both results in bright nights and no surprises in the dark.</p><h2>Aggressive Style</h2><p>We designed this bumper to match your UTV’s angles curves. The result is an aggressive-looking bumper that matches your Ranger’s overall look instead of looking like it came from a twelve-year-old’s imagination.</p><p>It’s got it all — strength, style, and utility. The only thing it needs is your name on it.</p><h2>Front Bumper Features:</h2><ul><li>3mm (1/8") thick sheet metal</li><li>2 D-Ring shackles</li><li>Precut holes for 3" cube lights</li><li>Pre-fit for our 3500 lb. winch, 4500 lb. winch, and 5000 lb. winch</li><li>UV resistant powder coat</li><li>Includes brackets to mount our 6” LED light bar or 12” LED light bar</li><li>Winch mounting bolt pattern:</li><li>3.0" x 4.87" (76 x 124mm)</li><li>3.0" x 6.6" (76 x 168mm)</li></ul>

<p>Your Polaris Ranger 1000 / 1000 XP / EPS / Crew was expensive so protect that investment with a Rival Front Bumper. Whether you're riding on or off-trail unexpected things happen, so you need to keep your machine protected. Made from steel tubing, these Rival Front bumpers are CNC machine bent to ensure the best quality fit and easy installation. There is no doubt that the Rival Front Bumpers are the best on the market today.</p><h2>Front Bumper Features:</h2><ul><li>Kit includes front bumper</li><li>Strong mounting</li><li>Made from Heavy Duty 1.65" steel tubing</li><li>Protects the front of your machine and your headlights and the side of your machine</li><li>Comes with all mounting hardware and fitting instructions</li><li>Easy installation</li><li>Pair it with a Rival Rear Bumper</li></ul>

<p>The DRT Motorsports Polaris Ranger XP Rear Winch Bumper fits the 2019+ Polaris Ranger XP 1000, all models. This DRT rear winch bumper adds much-needed protection and winch capability to the rear of your Ranger. The DRT RNGXPRB1 comes with integrated LED lights for better visibility at night. The bumper includes removable mesh inserts that can be easily color-matched to your vehicle. The RNGXPFB1 adds much more strength, protection, and functionality to the rear end of your Polaris Ranger.</p><h2>Rear Winch Bumper Features:</h2><ul><li>Steel Construction to provide real protection for your vehicle against hard hits</li><li>Comes with an integrated winch plate and LED lights</li><li>Works with most regular spool UTV winches and rated for up to 5000lbs in pulling strength</li><li>Easy Bolt-on installation</li></ul><p></p>

<p>Introducing the Thumper Bumper. Sometimes you get in a bind and just need to back it up! Or maybe you are the leader of the pack and just need to pull out your buddies all the time. Now you can with the winch ready Thumper Bumper! The only winch ready bumper on the market that is compatible with the Polaris Ranger Northstar AND the all new Ranger 1000 with rear mounted exhausts.</p><h2>Rear Winch Bumper Features:</h2><ul><li>CNC laser cut &amp; formed 3/16" AND 1/8" steel</li><li>HD D-Ring mounts for safe recovery points</li><li>3" Cube Light Ready or package it up with our Quad Row LED Lights that come with a wire harness that ties into the OEM reverse lights, dash switch that matches the OEM switches, and a Polaris Pulse Bar connector for quick and easy install!</li><li>Available in raw steel ready for powder coating or paint match</li><li>Extreme Duty 3 stage powder coated options available</li><li>CNC precision cut holes for winch mount (Up to 3500 lbs)</li><li>Winch mounting area: 14.75" x 5" x 4.25" (Width x Depth x Height)</li><li>All Stainless Steel Hardware for long lasting rust free protection!</li><li>MADE IN THE USA</li></ul>

<p>Add some protection to your Polaris Ranger with our brand new rear bumper. The B&M Fabrications Ranger Rear Bumper built to be tough without sacrificing style.</p><p>Our new Ranger Rear Bumper is compatible with the Ranger NorthStar Edition. Sturdy Bumper mounting in the center as well as to the bed ends.</p><p><strong>Note:</strong> 2018+ Ranger 1000 (*Support bars make very minimal contact with exhaust shield at full box dump.)</p>

<h2>Front Bumper w/Side Rails Features:</h2><ul><li>38mm x 1.5mm tubular steel</li><li>Bolt on design, no drilling necessary</li><li>Multiple frame mounting points for added strength</li><li>Headlight protection</li><li>Full coverage, heavy-duty look</li><li>Designed for farm, ranch, forestry or racing applications</li></ul>

<p>Beef up your UTV's rear end with Rough Country's Polaris Rear Bumper! This stylish, durable steel bumper offers unbridled protection for the rear of your UTV while giving you increased tire clearance for off-road articulation. With bold angles and contoured curves, this rear bumper is a true head-turner that's sure to get attention.</p><h2>Bumper Features</h2><ul><li>Easy Install.</li><li>1/8" Steel.</li><li>Durable powder coat finish.</li><li>Allows full function of dump bed.</li><li>Optional 6" SlimLine LED</li><li>2880 lumens (total)</li><li>18 watts (total)</li><li>Each light contains 6, 3 watt Cree LEDs</li><li>90 degree flood beam</li><li>Black panel design</li><li>IP67 Waterproof rating</li></ul><h2>Notes - Important</h2><ul><li>Bumper will interfere with rear mounted exhaust when bed is fully tilted.</li><li>When bed is fully opened bumper will contact larger than factory sized tires.</li><li>Lights are for off-road use only.</li><li>California Residents: Prop65 Warning</li></ul>

<p>Whether you&rsquo;re in need of some fog lights to see during low-visibility weather conditions, or angled lights to illuminate the curved path ahead when cornering, the Rough Country bumper panel set with built-in LEDs is the perfect solution for anyone seeking auxiliary Polaris Ranger lighting products. The bumper panels themselves are constructed using 11-gauge steel, then powder coated in black for both aesthetic purposes and to prevent rust and corrosion. The steel panels attach to the factory bumper, acting as an additional protective measure for both the nose of your Ranger as well as the posterior 6&rdquo; light bars. Both LED light bars included in the kit contain six 3-watt CREE diodes, capable of a combined output of nearly 3,000 lumens. The lights are recessed behind the steel bumper panels for protection, and they are 100% waterproof and nearly impervious to impacts. It doesn&rsquo;t matter if you&rsquo;re plowing through mud holes at night or ripping it up in the rain, sleet, or snow, if you&rsquo;re after intense brightness and increased front-end protection, the Polaris Ranger front bumper panel and LED combo kit by Rough Country is the way to go!</p><h2>Front Bumper Panels Features</h2><ul><li>Easy to install</li><li>11ga powder coated steel</li><li>Includes (2) 6&rdquo; Slim Line Cree LEDs</li><li>2880 lumens (total)</li><li>36 watts (total)</li><li>Each light contains 6, 3 watt Cree LEDs</li><li>90 degree flood beam</li><li>IP67 Waterproof rating</li><li>Durable die cast aluminum housing</li><li>Moisture Breather technology reduces moisture build-up behind the lens</li><li>Includes premium, flat-wound wiring harness with on/off switch</li><li>3 year warranty</li></ul><h2>In The Box</h2><h2>PARTS</h2><ul><li>(2) Bolt On Shroud Plates</li><li>(2) 6-inch Slimline LED Light bars</li><li>(2) Expandable Rubber Mount</li><li>Wiring harness w/ on/off switch</li></ul><p>&nbsp;</p><p><strong>NOTES</strong></p><ul><li>Cutting/Trimming of factory bumper is required</li><li>Fits Fullsize models only.</li><li>Will not fit 570 models.</li><li>Will not fit Highlifter Edition.</li></ul>

<p>Solid Steel Rear Bumper for the Polaris Ranger 800 and Polaris Ranger Full Size (Non-XP) is powder-coated black. Two mounting brackets bolted to the frame and the rear bumper built from 1/8" solid steel for a heavy-duty addition to the XP 900. This bumper not only protects your machine but looks great as well!</p>

<p>Designed to fit your OEM Polaris bumper, these dramatically change the look and purpose of your Polaris factory front bumper. Giving you two 6" dual row LED lights will help brighten your day but mostly your night. Plug &amp; Play wire harness that simply plugs in to the Polaris Pulse bar makes installation crazy easy. We even provide a dash switch that matches your factory rocker switches! Cool on the outside and inside.</p><h2>Factory Front Bumper Light Kit Features:</h2><ul><li>CNC Laser Cut &amp; Formed 1/8" Steel</li><li>Extreme Duty 3 stage powder coating</li><li>Two 6" Dual Row LED Lights</li><li>Polaris Pulse Bar wire harness with matching OEM rocker switch for dash</li><li>All Stainless Steel Hardware for long lasting rust free protection!</li><li>MADE IN THE USA</li></ul><p></p><p></p><p></p>

<p>No Limit is known for engineering the most durable, premium products offered to the ATV UTV industry. Our clean, stylish, custom front bumpers offer maximum protection, even for the harshest riding conditions.</p><p>These aftermarket front bumpers are laser cut using advanced technology from 12-gauge U.S. steel, then powder coated for the ultimate protection and finish.</p><p>The Gen 2 front bumper design is easy to install and makes winch compatibility effortless. When you think this bumper couldn’t get any better, we added cut-outs for recessed flush mount LED light pods to light the night! This armor is battle tested and designed to stand out from the crowd. Stay tuned as we begin to offer OEM matched powder coat colors.</p><h2>Bumper Features:</h2><ul><li>100% Made in USA</li><li>12-gauge steel</li><li>Heavy duty powder coat</li><li>quick bolt-on design</li><li>3″ LED flush mount light pods come with wiring harness</li><li>state-of-the-art laser cut perfection</li><li>100% satisfaction guarantee – If you don’t like them, send it back!</li></ul>

<h2>LED Light</h2><p>The LED light is included on the upgraded ranger bumper, which can increase security while driving and reversing.</p><h2>Easy Installation</h2><p>With integrated mounting holes, the Ranger 1000 XP rear bumper is easy to install, package includes instructions and all hardware.</p><h2>Durable and Impact-Resistant</h2><p>This ranger rear brush guard is made of heavy-duty steel, durable, and impact-resistant. Protecting your undercarriage, rear suspension, and tail light undercarriage from being hit well when riding tough terrain.</p><h2>Wide Application</h2><p>This ranger crew rear bumper is not only good in protection but also can be used with towing hooks.</p>

<p>The IQ Defender Rear Bumper for the Polaris Ranger is built from .095" steel tubing and offers increased protection for the back of your Polaris Ranger. The steel bumper easily mounts to the frame and will increase the durability and lifespan of the machine.</p><p><b>Note: Does not fit models with factory exhaust that wraps around the rear of the machine such as the HighLifter, NorthStar, and BackCountry Editions. When the dump bed is in its tilted position the bumper will contact the factory exhaust.</b></p>

<p><strong>Winch Ready</strong><br />You're not fooling anyone&mdash;even if you use it to get chores done, your Ranger XP is for playing in mud and bouncing off boulders. Get the protection and utility you need for your Polaris Ranger XP with SuperATV's Winch Ready Front Bumper. It's tough, it looks awesome, and it puts the utility back into Utility Task Vehicle.</p><p><strong>Strength You Can See</strong><br />With 1/8" heavy-duty steel plating, this front bumper is as strong as it is stylish. Cruising down rough trails through tight foliage has never been safer. It's tall enough and wide enough to provide you protection from any angle. The wrinkle-black finish gives it that final layer of protection so it won't scratch and corrode easily.</p><p><strong>The Ultimate Utility Belt</strong><br />When you&rsquo;re out on a job, you need to be ready to handle anything and everything. We designed this bumper so that you can install any of our Black Ops Winches easily. The tandem tow hooks make it easy to pull other vehicles out of sticky situations- and get pulled out yourself. It&rsquo;s a whole new tool in your toolbox. Don't leave home without it.</p><h2>Polaris Ranger XP Winch Ready Front Bumper Features:</h2><ul><li>Made with 1/8" (3mm) thick steel plating</li><li>Tow hooks for added utility</li><li>Pre-fit for any of our Black Ops Winches</li><li>Accepts winch mounting bolt patterns:</li><ul><li>3.0" x 4.87" (76 x 124mm)</li><li>3.0" x 6.6" (76 x 168mm)</li><li>Bolt patterns match most leading models&mdash;check your model before installing</li></ul></ul>

<h2>Built with Utility & Style in Mind</h2><p>A winch-ready bumper is handy in many ways. First of all, you have room for a winch, which every rider needs. You never know what'll happen on the trails. Second, you get added protection for the front of your Ranger 1000 thanks to the 1/8" thick steel plating. Lastly, you get a rugged bumper that makes your ride look incredibly strong. There's really no going wrong with a SuperATV Winch Ready Bumper for your Polaris Ranger 1000.</p><h2>A Winch Can Save the Day</h2><p>We all think it's never going to happen to us... until it does. Don't be one of those guys depending on everyone else to get you out of whatever situation you've got yourself into. Think about it - would you rather be the guy getting stuck or the one saving the day? We think the answer's pretty easy. With this Polaris Ranger bumper, you can add any of our 2500 - 6000 lb. Black Ops Winches so you'll be ready for anything. And when the going gets tough, SuperATV winch-ready bumpers also feature tow hooks to make it easier to pull you out.</p><h2>Strong & Sexy</h2><p>The best part about this Ranger bumper (other than the utility) is that you don't have to sacrifice looks for protection. This UTV bumper is built with 1/8" heavy-duty steel plating, ensuring that whatever you run into won't damage your frame. The added benefit is that it looks cool as hell too. The powder-coat finish provides one last layer of UV-resistant protection so it won't scratch or corrode easily. This will be one add-on you won't regret.</p><h2>Winch Ready Bumper Features</h2><ul><li>Made with 1/8" (3mm) thick steel plating</li><li>Tow hooks for added utility</li><li>Accepts winch mounting bolt patterns:</li><ul><li>3.0" x 4.87" (76 x 124mm)</li><li>3.0" x 6.6" (76 x 168mm)</li><li>Bolt patterns match most leading models - check your model before installing</li></ul></ul>

<p>The strongest and meanest Polaris Ranger front bumper is here by Ranch Armor! This model is specifically designed for the (2018+) Polaris Ranger 1000. The unique design follows the lines of the new body style Polaris Ranger, while also being incredibly functional as well. Bumper allows for winch (most brands) to be mounted to factory location inside tucked behind bumper. Factory winches on: Northstar, and Texas Editions, are 100% compatible without having to be removed or modified. The built-in winch area behind front skid plate also allows more air to flow into the radiator keeping the unit cooler. Easily access your winch clutch (see pictures) to free up cable via a side entry hand-slot.</p><p>Construction is comprised of: steel 3/16" main vertical front beams, 2" Pipe, and 11 Gauge tread plate. All plate is laser cut and CNC press broke. Complete welded construction, done with beautiful attention to detail right here in Texas! The final step is an industrial ultra-durable powder coat finished to perfection.</p><p>Ranch Armor Bumpers are 100% Born and Built in Texas. We will never outsource like some of our competition. Support American jobs!</p><h2>Polaris Ranger 2018-2021 Ranch Armor Bumper Specs:</h2><ul><li>3/16" Vertical Laser Cut Crash/Bump Frame</li><li>1/2" Shackle Mounts</li><li>2&rdquo; heavy duty pipe base</li><li>Frame mounted</li><li>11 gauge diamond plate</li><li>Winch ready hide-away</li><li>2&rdquo; receiver</li><li>Requires no vehicle modifications</li><li>Powder coat finish</li></ul>

<p>Mounting a sturdy and durable front bumper is a plus for hunters, adventurers, and explorers. Don’t want to slow down again and again at ditches? Get Front Bumper by Bad Dawg that is carefully manufactured with premium quality metal and is protected with fine black powder to withstand harsh weather conditions. Yes, it wouldn’t wear off with a blink of an eye. The robust bumper also has excellent towing capability. Accessorize your Ranger with a style that’ll guard your vehicle against mishaps everywhere. You’d never get stuck on-road or off-road between the stubborn ditches. The heavy-duty bumper includes clevis hooks for amazing towing capacity, a universal winch-mounting plate, and lower bash plate. You can add stinger bar as well to create the toughest off-road Ranger. Get the best one and you will have the most rugged and enthralling off-road experience than ever before. Last but not least, installing the kit is a piece of cake so you get a range of features with the ease of installation. </p><h2>Ranger 900 XP, 900 Crew, 570 Front Bumper Features:</h2><ul><li>Heavy Duty Front Bumper</li><li>Integrated winch mount</li><li>Included clevis hooks</li><li>Lower bash plate</li><li>Includes all mounting hardware</li><li>Made from 1/8" thick American Steel</li><li>Textured black powder coated for added protection</li></ul><h2>Stinger / Bull Bar Features:</h2> <ul><li>Bad Dawg Accessories' Stinger/Bull Bar is a great new addition to the Ranger XP 900 front bumper.</li> <li>It mounts to the bumper with already existing hardware, so this can be purchased with a new bumper or added to a bumper purchased in the past.</li> <li>This new Stinger/Bull Bar is a great way to add more protection to the winch mounted on the bumper and to the front of the Ranger.</li> </ul><p><p><b> Note: Does Not Include Winch </b></p></p>

<p>Whether you are going out on the well-beaten trails or creating new ones where few have dared to go before, means that you will be facing many obstacles along the way. These can be brambles, branches, rock or an assortment of other things which can severely damage the front side of your ride. This can be avoided by using the Full-size Polaris Ranger Front Bumper with Winch Mount by EMP.</p><p>The bumper/brush guard is manufactured from 1/8" thick American Steel coated with textured powder to increase the durability. It is specially designed so that it can be mounted on the radiator. The front tube is 1-1/2" in Diameter. There is also stainless steel mounting hardware that allows you to mount your winch on top to avoid bending over to reach your cable. Front Bumper by EMP also has Two Winch Bolt Patters, one for wide spool winches and one for the regular spool. You no longer have to worry about your Machine with this rigid and durable front bumper. </p><h2> Front Bumper with Winch Mount Features:</h2><ul><li>Replaces your stock front brush guard</li><li>All welds ground smooth</li><li>1-1/2" Diameter tube</li><li>Made from 1/8" thick American Steel</li><li>Textured powder coated for superior protection</li><li>Laser cut and CNC formed to ensure a great fit</li><li>Two Winch Bolt Patterns (3" deep x 4.875" wide for regular spool and 4" deep x 6" wide for wide spool winches)</li><li>Made in the USA</li></ul>

<p><strong>Polaris Ranger 1000 Front Winch Bumper</strong></p><p>This front winch bumper is the upgrade you've been looking for to put on your Polaris Ranger. Wild Boar Parts specializes in designing products that not only look good but stand up to the hard work you put your machine through. This bumper is made of heavy-duty steel and includes two D-rings for extra pulling capabilities. We've also included (2) LED light pods to help light the way at the night.</p><p>This is a winch-ready bumper with pre-drilled holes to match MOST major winch brands (winch not included). Be sure to check out our discounted winch options for this product.</p><h2>Polaris Ranger Front Winch Bumper W/ LEDs Features:</h2><ul><li>Made from 10 gauge steel for extra strength</li><li>Replaces your stock brush guard</li><li>Allows you to mount the winch up top on the bumper</li><li>Extra support Beams are mounted inside the bumper for your winch</li><li>Powder Coated Black</li></ul><p><strong>Bumper Specs</strong></p><ul><li><strong>Front or Rear:</strong> Front</li><li><strong>Make:</strong> Polaris</li><li><strong>Model:</strong> Ranger Fullsize</li></ul>

<p>Tack on aggressive style and much-needed dependability with the Polaris Ranger 570 &amp; 900 XP Crew Front Bumper. With a 4 winch bolt pattern, this front bumper guard is built strong for pulling or towing up to 4500lbs. This aftermarket front bumper for the Polaris Ranger has had all welding spots ground down for a smooth finish and fully finished in durable black powder-coating. Featuring an engraved Wild Board logo in the front, this bumper adds a great look to complete your rugged ride. This front bumper has also been laser cut for maximum precision and CNC formed, giving it a perfect fit for the Polaris Ranger. Elevate your style today with the Polaris Ranger 570 &amp; 900 XP Crew Front Bumper by Wild Boar.</p><h2> Front Bumper Features:</h2><ul><li>Replaces your Stock Front Brush Guard</li><li>All Welds are Ground Smooth</li><li>Black Powder Coated Finish Adds Durability</li><li>Laser Cut and CNC Formed for Perfect Fit</li><li>Four (4) Winch Bolt Patterns</li><li>Made in the USA</li></ul><p>&nbsp;<p><b>Note:</b> Winch is not included in this purchase</p></p><p><a href="%%GLOBAL_ShopPathSSL%%/polaris-ranger-full-size/accessories/winches.html" title="winche page" target="_blank">Check out our line of winches we have available for you to purchase</a></p>

<p>Our Ranger Front Bumpers are engineered with precision to match the contour of your UTV, giving it a custom look while providing ultimate protection. Our bumpers will keep your Ranger safe from impacts and collisions, ensuring you get maximum performance and longevity from your machine.</p><p>Each front bumper accommodates built-in LED pod light and light bar brackets making installing any lighting options a breeze. They also accommodate and are designed with room for plenty of winch mounting options.</p><p>Our bumpers are available in a variety of models, so you can choose the one that fits your specific UTV perfectly. Our custom design adds a touch of style and attitude to your machine while keeping it safe from damage.</p><h2>Features</h2><ul><li>1.5" & 1.75" durable steel tube design.</li><li>High-quality powder coat designed to take the abuse.</li><li>Front Bumpers are winch compatible.</li><li>Built-in LED light pod and light bar mounting brackets.</li><li>DIY installation</li><li>3-Year Manufacturer Warranty</li></ul>

<p><strong>Sleek Strength: </strong>SuperATV's Rear Bumper for the Polaris Ranger XP 1000 gives you all the protection of 1.75-inch diameter DOM steel tubing and a sleek, low-profile design to keep your dump bed and tailgate functional. It installs easily using factory mounting locations so that you can get up and running quickly.</p><p><strong>Built to Last: </strong>We built this bumper so that it will last as long as your Ranger. We added CNC machined steel endcaps for better protection and style. We use 3/16" laser-cut steel plating to mount this bumper directly to the frame for ultimate strength. We finish it with a UV-resistant powder coating to protect it from corrosion. No matter what you get up to in your UTV, our bumper will keep it safe.</p><h2>Rear Bumper Features:</h2><ul><li>Made of 1.75" diameter heavy-duty steel tubing</li><li>Allows use of tailgate and dump bed</li><li>Mounts directly to the frame</li><li>Sleek and stylish design</li><li>CNC machined endcaps give you ultimate protection</li><li>UV-resistant wrinkle black finish</li><li>Easy to install-comes with all hardware and instructions</li><li>No drilling required</li></ul>

<p><strong>Durable and Impact-Resistant</strong></p><ul><li>Made of heavy-duty steel iron, this rear brushguard is durable, impact-resistant. Protecting your undercarriage, rear suspension and tail lights from being hit when riding on tough terrains.</li></ul><p><strong>Used with Tow Hitch</strong></p><ul><li>This crew rear bumper is not only a good protector, but also can be used with towing hooks for hauling, pulling and rescuing.</li></ul><p><strong>Enough Clearance</strong></p><ul><li>Built to ensure rear clearance, the rear wheels can still move even when your utv is dumped completely.</li></ul><p><strong>Easy Installation</strong></p><ul><li>Designed with integrated mounting holes, this heavy duty rear bumper is easy to install, no drilling required. The package includes instructions and all hardware.</li></ul>

<p>The HMF Defender Rear Bumper for the Polaris Ranger is constructed from .095” wall steel tubing and powder coated for the ultimate protection on the rear of the Polaris Ranger The rear bumper easily mounts to the frame of the vehicle and provides the strength and protection to handle even the most demanding situations. It has been specifically designed to work with both stock and HMF exhaust systems and the color options available will match the manufacturer’s scheme.</p><h2> Rear Bumper Features :</h2><ul><li>Built from .095” wall, heavy-duty steel tubing.</li><li>Easily mounts to the frame.</li><li>Provides extra strength and protection.</li><li>Works with stock and HMF™ exhausts.</li></ul>

<p>The all new Deluxe UTV rear is the latest addition to the Tough Country UTV Lineup. This bumper comes standard with decking across the top and two steps built into the bumper. This unit also is equipped to hold Torch Flush Mount LEDs and coated with our rugged Black Wrinkle finish.</p><p>Tough Country is known for making strong and durable truck bumpers and now they bring the same strength and durablility to your SxS!</p>

<p>The DRT Motorsports Polaris Ranger XP Front Winch Bumper fits the 2019+ Polaris Ranger XP 1000, all models. This DRT front winch bumper replaces the stock OE bumper with a high-strength steel winch bumper and skid plate. The bumper includes removable mesh inserts that can be easily color-matched to your vehicle. The RNGXPFB1 adds much more strength, protection, and rigidity to the front end of your Polaris Ranger.</p><h2>Winch Bumper Features:</h2><ul><li>Steel Construction to provide real protection for your vehicle against hard hits</li><li>Comes with an integrated winch plate and bolt-on skid plate</li><li>Works with most regular spool UTV winches up 5,000lbs</li><li>Easy Bolt-on installation</li></ul><p></p>

<p>No one wants to be caught in a sticky situation in their Ranger with no way to get out! S3 Power Sports has you covered with the Rear Winch Bumper for your Ranger. Engineered for strength and designed to compliment the already great styling of the Ranger, the S3 bumper will hold up to a 5000 lb winch which will help you out of the worst predicament. Our bumper is designed to keep your winch out of the mud and water but still offers the strength and style you have come to expect from S3. Let S3 Power Sports make sure you are prepared to winch out of virtually anything with our Polaris Ranger Winch Bumper!</p><h2>Bumper Features:</h2><ul><li>Part Number(s):S3093 S3151</li><li>Completely "Bolt-On" application</li><li>Increased Back end protection</li><li>Engineered for up to a 5000 lb. regular Spool winch</li><li>Optional Flush-mount lights</li><li>Compliments factory body lines</li><li>Made in the U.S.A</li><li>Lifetime Structural Warranty</li></ul><p><p><b>Notes:</b> Bumper includes Light-Hole Cut-Outs.</p></p>

<p>Polaris Ranger Rear Bumper by KFI Products</p><p><strong>Specifications:</strong></p><ul><li>100% MADE IN USA.</li><li>Same tube size as OEM front bumper.</li><li>Constructed of steel.</li><li>Unlike all other competitors, our bumpers are metal bead blasted before they are powder coated for the best possible finish prep.</li><li>Powder coated Black Wrinkle (Textured) for supreme durability.</li><li>Bumper tilts with the bed.</li><li>Very easy to install.</li><li>Complete installation instructions included .</li><li>All mounting hardware included.</li><li>Satisfaction guaranteed.</li></ul>