SFW

<p>Get your rig out of dodge with KFI’s 4500lb Standard Width UTV Winch. With two control switches -- one dash mounted and one hand held -- a 1.7hp permanent magnet electric motor, and an all-metal gear driven transmission, there are few situations that that this aftermarket winch can’t pull you out of. Its 38’ cable winds effortlessly around its multi-directional roller, utilizing the cam activated, free spooling clutch and mechanical brake system to stay tight when needed and loosen up on demand. Easily mounted by its 4-hole mount plate, you’ll have the unit installed and be off to the races in no time.</p> <p>When things go awry and situations get a bit too gnarly, you’ll be happy that you invested in a strong and reliable aftermarket winch. When it comes to durability and power, it's hard to find better than KFI’s 4500lb Standard Width UTV. Its all-metal planetary gear drive provides the torque, while the 1.7hp permanent magnet motor converts 12 volts of DC power to 4500 pounds of pulling force. The kit is easy to install and comes with all of the required components to affix the device to your UTV-specific winch mount. When youire stuck, waist-deep in a mud pit, you’ll be glad that, in addition to the dash mounted control switch, the unit comes with a handheld operating remote that can be used from the outside of the vehicle.</p> <p>The all-metal, cam-activated clutch is free spooling, which, when coupled with the multi-directional roller, makes pulling in and letting out line, a snap. The entire system is water-tight, and comes complete with a heavy-duty electric contractor, which protects your UTV’s electrical system from shorts caused by line abrasion, punctures and blunt damage. Cast from aluminum and quality steel, the components are built to last. With a cable that stretches 38’ in length, you’ll have the flexibility to reach nearby poles, trees or your buddy’s rig to effortlessly free your UTV from whatever is restricting its movement.</p> <h2>Winch Kit Features:</h2> <ul> <li>Model: U4500 UTV Series</li> <li>Rated Line Pull: 4500 lbs.</li> <li>Motor: 12V DC, 1.7 hp Permanent Magnet</li> <li>Gear Ratio: 166:1</li> <li>Gear/Transmission: All-metal Planetary Gear Drive</li> <li>Brake: Dynamic and Mechanical</li> <li>Clutch (free spooling): All Metal Cam Activated Freespool</li> <li>Drum Size: 2" (D) x 3.19" (L)</li> <li>Cable: 15/64" (D) x 38' (L)</li> <li>Fairlead: Multi-directional Roller</li> <li>Control: Deluxe Dash Mounted Control Switch and a Heavy Duty Corded Remote Switch</li> <li>Winch Dimensions: 14.6" L x 4.55" D x 5" H</li> <li>Mount Plate: Fairlead Mount Only (A Model Specific Mount is necessary for your make and model UTV)</li> <li>Mounting Bolt Pattern: 3.00" x 4.875" (4-Hole)</li> <li>Recommended Battery : 12 Amp/hour minimum</li> <li>Winch Weight: 36.6 lbs. (complete kit)</li> </ul>