<p><strong>Get a Replacement Fast</strong><br />So you got a little too wild on the trails and now the inner tie rods on your RackBoss 2.0 need replacing, huh? Don't sweat it, we've got your back. SuperATV's RackBoss 2.0 Replacement Inner Ball and Sockets are designed to fit your RackBoss 2.0 tie rod or rack and pinion kits. We know downtime is a bummer, which is why we've got our replacement inners ready to ship out to your doorstop ASAP. Whether you need to replace broken parts or just keep some spares for emergency situations, we've got what you need to keep your side-by-side in action.</p> <p><strong>Adjustable and Tough</strong><br />RackBoss 2.0 inner ball and sockets aren't like standard inner tie rods. They're made to pair with the best damn rack and pinion on the planet-they've gotta be tough. That's why they use with 16 mm rack threads and massive 3/4" rod threads.</p> <h2>Rackboss 2.0 Replacement Inner Tie Rod Ends Features:</h2> <ul> <li>M16 inner threads</li> <li>3/4" outer threads (tie rod side)</li> <li>Measures 5-9/16" from end to end</li> <li>Adjustable housing maintains optimal joint stiffness</li> <li>Made of heat-treated chromoly steel</li> <li>Sold in pairs</li> </ul> <style><!--td {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}--></style> <p><span data-sheets-root="1"><strong>Note</strong>- Designed for RackBoss 2.0 Solid Steel Bar and Billet Aluminum Hex racks and tie rod kits only</span></p> <p><strong>Warning:</strong> This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.</p> <p><strong>⚠ California Proposition 65 Warning ⚠</strong><br /><strong>Warning:</strong> This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm</p>

<p>Each Weld on Bump Stop can is precision CNC-machined, not laser cut, for increased accuracy. Made from 2.25″ tubing with a .125″ wall for a 2.00″ inside diameter. After it’s machined, we weld on the brackets for the socket head cap screws.</p><p>Each piece comes supplied with two ⅜” bolts and two nylon locking nuts.</p><p>We use a simple, but very effective clamping design our engineers have run through countless tests on their own off road rigs. Fits most 2.0″ bump stop cans.</p><p>*TIP* When welding you can overheat the bump stop can which can cause it to not fit correctly. Make sure welder is set to the correct settings. Too much heat can warp the part. Check to make sure your bump stop fits properly in the bump stop can before you weld the can on your frame.</p><h2>Bump Stop Can Features:</h2><ul><li>Made from 2.25″ DOM tubing</li><li>.125” wall</li><li>2.00” inside diameter</li><li>Includes two ⅜” bolts and two nylon locking nuts</li></ul><p><b>Weight: </b>1.56 lbs</p><p><b>Dimension: </b>7.02 × 2.90 × 2.26 in</p>

<p>A great addition for aftermarket A Arms with machined ball joint pockets.</p>

<h2>High-Strength Heim</h2> <p>Your suspension needs good Heim joints, and good Heim joints are exactly what we've got. Our right-hand threaded 5/8'' Heim joint has a 5/8'' bore and 5/8-18 thread pitch. The precision steel construction ensures a quick, easy fit and strength to handle the rough trails ahead. Whether you're bolstering your Ranger radius rods or building a new late-model machine for the track, this heim will keep everything moving smoothly.</p> <h2>John Deere Gator Heim Joint 5/8" Features</h2> <ul> <li>Right-hand threaded</li> <li>5/8" diameter bore</li> <li>5/8-18 thread pitch</li> </ul>

<p><strong>Keep Your Portals from Leaking</strong><br>Keeping your GDP Portal Gear Lift's gears well oiled is the best way to maximize performance and longevity. But sometimes your plugs strip out or get damaged during routine maintenance. If that happens, we've got the fix. SuperATV's Fill and Drain Plug Kit is the best way to keep your Gen 3 portals from leaking. It comes with two heavy-duty steel plugs and O-ring seals. You also get one magnetic drain plug and one non-magnetic fill plug.</p><h2>Portal Gear Lift Fill &amp; Drain Plug Kit Features:</h2><ul><li>Made of heavy-duty steel</li><li>Includes O-ring seals</li><li>Magnet in drain plug catches metal shavings</li><li>Comes with 2 plugs</li><li>M16 x 1.5 thread pitch</li><li>Compatible with Gen 3 GDP Portal Gear Lifts</li></ul><h2>Includes:</h2><ul><li>(1) Magnetic drain plug</li><li>(1) Non-magnetic fill plug</li></ul><p><strong>Warning:</strong> This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.</p><p><strong>⚠ California Proposition 65 Warning ⚠</strong><br><strong>Warning:</strong> This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.</p>

<h2>X300 Replacement Boot Kit Features:</h2><ul><li>Comes with new synthetic grease to keep your CVs cool each time you ride</li><li>Comes complete with bands and clips</li><li>Made of high-strength, flexible TPEE (Thermoplastic Elastomer)</li><li>Easy to install</li><li>Designed to work with X300 Axles only</li></ul><p><strong>Note:</strong></p><ul><li>These boots are designed to work with Rhino X300 Axles. The SKU number associated with your axle can be found on the shaft.</li></ul>

<p>FK rod ends (heims) are the preferred component for racers and now Assault offers these components as an upgrade to the Assault parts supplied with our Tie Rods, Radius Rods and sway bar links. These heims are available with left (SKU: JMXL10) and right (SKU: JMX10) thread and are made from heat-treated alloy steel.</p><p>Ball: 52100 steel; Rc 56min; Hard chrome plated<br>Body &amp; race: Alloy steel; Heat treated; Zinc plated; Chromate treated, PTFE Lined</p><h2>Alloy Heim Bearings Features:</h2><ul><li>Fits Assault Industries suspension components</li><li>3-Piece Construction</li></ul><h2>Package Contents:</h2><ul><li>(1) Rod End Component</li></ul><p><strong>Note:</strong></p><ul><li>Fitment-5/8" Heim</li></ul><p><strong>WARNING</strong>: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.</p><p><strong>⚠ California Proposition 65 Warning ⚠</strong><br>This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.</p>

<p>Brand new nuts for many Polaris machines that would be to many applications to list. Brand new high quality part that are exactly the same as the original! Sold as a set of SIX. This replaces Polaris part number <strong>7547313</strong>.</p>

<p>Replace your missing or stripped out hardware with these replacement 3/8 fine thread nuts from Quad Logic. These Nylock nuts are used all over Polaris machines. Primarily used in the front and rear suspension systems along with many steering and motor mount applications. This 6 pack of Nylock nuts are must have when servicing your machine. Please check with the Polaris parts diagrams to ensure the proper fitment.</p> <p>(Sold as a package of 6)</p> <p>Replaces Polaris Part Number(S): <strong>7542439</strong></p>